ASTM B166 UNS N06600 round bar

  • Home
  • ASTM B166 UNS N06600 round bar
ASTM B166 UNS N06600 round bar
What are the typical ASTM B166 UNS N06600 round bar sizes?

ASTM B166 UNS N06600 popularly known as Inconel 600 is generally cold-worked and recommended for applications that need to resist heat and corrosion. The alloy comes with good mechanical properties, which include high strength and workability.

The ASTM B166 UNS N06600 round bars are typically available within the size range of 5-500mm. They can be around 100 to 3000mm long or above. Clients can request to customize the size of the ASME SB166 round as per their specific application requirements.

Table of content

We are one of the biggest and highest-quality ASME SB166 UNS N06600 rod manufacturer in India, view parameters for tolerance and surface finish

What are the parameters for tolerance and surface finish of ASME SB166 UNS N06600 rod ?

The ASME SB166 UNS N06600 rod generally maintains a strict tolerance of the h9, h11 or k12 standards. This will ensure that the rods are manufactured precisely. The ASTM B166 cold drawn bar and rod come with a surface roughness of Ra ≤ 1.6 μm and offers a smooth finish. The hot rolled bars, on the other hand, might exhibit scale.

There are different types of finishes available for N06600 rods, like turned, ground and the UNS N06600 bright bars are mainly used for aesthetic purposes. All the product lines under the N06600 material like bars, rounds, etc., follow similar parameters that guarantee quality and consistency throughout.

When you can purchase the correct size UNS N06600 flat bar and and hex bar here? why pay more? also see heat treatment

ASME SB166 UNS N06600 rod

ASME SB166 UNS N06600 rod

B166 UNS N06600 flat bar

B166 UNS N06600 flat bar

SB166 UNS N06600 hex bar

SB166 UNS N06600 hex bar

What is the purpose of B166 UNS N06600 flat bar heat treatment?

Heat treatment is done on the B166 UNS N06600 flat bar so that they can achieve specific material properties. The procedure alters the microstructure of the N06600 material and enhances its mechanical properties. It can also help to relieve residual stress and optimize corrosion resistance properties.

Heat treating N06600 flat bar can also induce dimensional stability and through annealing, it can reduce hardness and improve ductility. Different types of heat treatment like age hardening, quenching, etc., are available and chosen according to the material properties and intended application.

As a reliable stockist and supplier, we offer ASME SB 166 N06600 square and rectangular bar stock in size range from 3mm to 800 mm at a reasonable cost in Mumbai

ASTM B166 UNS N06600 round bar specification
Diameter Length Condition
upto 9" upto 24 inch or custom cold drawn, annealed, turned etc.
Specification Form Application
ASTM B166 | ASME SB166 Round, Hex, Square, Rectangular
gas turbine component, aerospace
We are available to assist you with any ASTM B166 bright and cold drawn bar stock requirements to fulfil your project's requirements, check various other available shape here
Most selling types of ASME SB166 UNS N06600 rod
ASTM B166 N06600 square bar

ASTM B166 N06600 square bar

  • Size: M2 - M160
  • Length: 3 to 200 mm
  • Melting point: 1413 °C (2580 °F)
ASME SB166 N06600 rectangular bar

ASME SB166 N06600 rectangular bar

  • Density: 8.47 g/cm3
  • Tolerance H7 to H11
  • Cold-drawing and Hot Rolling
UNS N06600 bright bar

UNS N06600 bright bar

  • Bright
  • Black
  • Pickling white
Find out all the technical details of ASME SB166 round including equivalent, chemical and mechanical composition etc.
B166 UNS N06600 flat bar equivalent
GRADE OLD BRITISH JIS UNS G0ST AFNOR OR
Inconel 600 EN BS NCF 600 N0600 XH60BT NC15FE11M ЭИ868
NiCr15Fe NA 14
SB166 UNS N06600 hex bar mechanical properties
Element Tensile Strength Melting Point Yield Strength (0.2%Offset) Density Elongation
Inconel 600 Psi – 95,000 , MPa – 655 1413 °C (2580 °F) Psi – 45,000 , MPa – 310 8.47 g/cm3 40 %
ASTM B166 N06600 square bar chemical properties
Grade Cr S Ni Fe Mn C Si P Cu
Inconel 600 Min %. 14 6
Max%. 17 0.015 72 10 1 0.15 0.5 0.015 0.5
What are the typical tests conducted on SB166 UNS N06600 hex bar ?

A number of tests can be conducted on SB166 UNS N06600 hex bar to ensure its quality, suitability and compliance with international standards.

  • Chemical analysis ensures that the hex bar meets the requirements specified by ASTM SB166 standards.
  • Mechanical properties testing can check the yield strength, tensile strength, etc., of the bar to ensure it meets the application requirements.
  • Hardness tests check the N06600 material's resistance to deformation.
  • Dimensional inspection is to ensure that the hex bar meets the specified requirements.
  • A surface inspection enables checking for defects on the N06600 hex bar surface.
What distinguishes ASTM B166 UNS N06600 from UNS N06601?

ASME SB166 N06600 rectangular bar material has high nickel content which means better corrosion resistance properties. They can resist temperatures up to 1093 ºC and has high strength along with Hot & cold workability. UNS N06601 has added aluminium and thus, they have better high temperature oxidation resistance up to 1024 ºC. They show high resistance to carburization and metallurgical stability.

Which industries frequently use ASTM B166 N06600 square bar ?

ASTM B166 N06600 square bars are preferred by industries that require corrosion resistance, elevated temperature strength and reliable performance in harsh environments. They are found in aerospace, chemical processing, petrochemical, power generation, oil & gas, nuclear and automotive industries.

Inconel 600 is a non-toxic and food grade material which is why they are found in the food & beverage industries. They are also found in retorts, roller hearths and different furnace components for heat treating trays.

close