ASTM B168 UNS N06600 plate

  • Home
  • ASTM B168 UNS N06600 plate
ASTM B168 UNS N06600 plate
How much does ASTM B168 UNS N06600 plate cost in India?

Inconel 600 are quite expensive due to their chemical composition and mechanical properties. However, their exact price in India varies with the supplier depending on their internal costing and market conditions.

The price of ASTM B168 UNS N06600 plate quoted to different buyers can be different based on their specific requirements like size, dimensions, quantity, testing & certifications and delivery locations.

If you are looking for UNS N06600 plate stock at a competitive rate, contact reliable suppliers like Regent Steel & Engineering Co.

Table of content

The pleasure of introducing ourselves as the initial ASME SB 168 UNS N06600 sheet supplier in India, view its characteristic

What are qualities of UNS N06600 sheet ?
  • The ASME SB 168 UNS N06600 sheet can retain its mechanical properties at elevated temperature conditions. They also have exceptional resistance to oxidizing environments.
  • Inconel 600 shows good corrosion resistance in acidic, alkaline and chloride containing operating conditions.
  • They have a low coefficient of thermal expansion along with good electrical & thermal conductivity.
  • Inconel 600 has high weldability, formability, machinability and fabricability.
  • UNS N06600 is resistant to carburization, chlorination and hydrogen embrittlement.

As the most honest stockist of UNS N06600 strip and coil in Mumbai, provide affordable pricing, see criteria should considered before buy

What criteria should you use to choose the best B168 UNS N06600 coil for your needs?
  • Understand your application requirements and ensure it aligns with the properties offered by SB168 UNS N06600 coil. This would include ensuring the material adheres to the required standards and specifications. Also, see if the corrosion & temperature resistance along with other mechanical properties are as par with the operating conditions of the application.
  • The size, dimension and surface finish of the coil must be customized according to the specific requirements.
  • Ask for relevant quality checks and certification to ensure the integrity of the coil.
  • Make sure the prices of the Inconel 600 coil are within your budget.

We keep a ready stock supply of ASME SB168 N06600 clad plate sizes ranging up to 3" thick and sheet from .016 to .156" thick for aerospace applications

ASTM B168 UNS N06600 plate specification
Sizes of coil ASTM Standard Tolerance according to
  • Thickness: 0.1 ~ 5.0 mm
  • Width : 0.5 ~ 1.2 m
  • ASTM B168
  • ASME SB 168
ASTM B906
Sizes of sheet Sizes of strip Sizes of plate
  • Width: 0.5 ~ 1.0 m
  • Thickness: 0.1 ~ 5.0 mm
  • Length: 0.7 ~ 6.0 m
  • Width : 5 ~ 200mm
  • Thickness: 0.05 ~ 3 mm
  • Width: 0.05 ~ 2.0 m
  • Thickness: 2.5 ~ 100 mm
  • Length: 0.1 ~ 6.0 m
Density Melting point Range of operating temperature
304 lb/in3 1354 to 1413°C 870 to 1230°C
We supply ASTM B168 N06600 foil and annealed plate that can be cut to length in any size to fulfil the requirements of the client, find out more types here.
Most frequent types of ASME SB 168 UNS N06600 sheet
ASTM B168 UNS N06600 sheet

ASTM B168 UNS N06600 sheet

B168 UNS N06600 strips

B168 UNS N06600 strips

ASME SB 168 UNS N06600 annealed plate

ASME SB 168 UNS N06600 annealed plate

ASTM B168 N06600 coils

ASTM B168 N06600 coils

ASME SB 168 N06600 foils

ASME SB 168 N06600 foils

B168 N06600 clad plate

B168 N06600 clad plate

SB 168 UNS N06600 shim sheet

SB 168 UNS N06600 shim sheet

ASTM B168m UNS N06600 hot rolled plate

ASTM B168m UNS N06600 hot rolled plate

SB 168 N06600 cold rolled plate

SB 168 N06600 cold rolled plate

Thickness permissible variations of ASTM B168 N06600 sheet
Specified Thickness, in. (mm)   0.018 to 0.025 incl(0.5 to 0.6), Over 0.034 to 0.043incl (0.9 to 1.1), Over 0.025 to 0.034incl (0.6 to 0.9), Over 0.056 to 0.070 incl(1.4 to 1.8), Over 0.043 to 0.056 incl(1.1 to 1.4), Over 0.078 to 0.093incl (1.9 to 2.4), Over 0.070 to 0.078incl (1.8 to 1.9), Over 0.093 to 0.109incl (2.4 to 2.8), Over 0.125 to 0.140incl (3.2 to 3.6), Over 0.140 to 0.171incl (3.6 to 4.3), Over 0.109 to 0.125 incl(2.8 to 3.2), Over 0.171 to 0.187incl (4.3 to 4.8), Over 0.234 to 0.250incl (5.9 to 6.4), Over 0.187 to 0.218 incl(4.8 to 5.5), Over 0.218 to 0.234 incl(5.5 to 5.9),
Cold rolled Over 48 to 60 incl 0.003 (0.08) 0.005 (0.13) 0.004 (0.10) 0.006 (0.15) 0.005 (0.13) 0.008 (0.20) 0.007 (0.18) 0.009 (0.23) 0.010 (0.25) 0.012 (0.31) 0.010 (0.25) 0.013 (0.33) 0.018 (0.46) 0.015 (0.38) 0.016 (0.41)
48 and Under 0.002 (0.05) 0.004 (0.10) 0.003 (0.08) 0.005 (0.13) 0.004 (0.10) 0.007 (0.18) 0.006 (0.15) 0.007 (0.18) 0.008 (0.20) 0.009 (0.23) 0.008 (0.20) 0.010 (0.25) 0.013 (0.33) 0.011 (0.28) 0.012 (0.31)
Hot rolled Over 48 to 60 0.004 (0.10) 0.006 (0.15) 0.005 (0.13) 0.007 (0.18) 0.006 (0.15) 0.009 (0.23) 0.008 (0.20) 0.010 (0.25) 0.014 (0.36) 0.016 (0.41) 0.012 (0.31) 0.017 (0.43) 0.022 (0.56) 0.019 (0.48) 0.020 (0.51)
48 (1220) and Under 0.003 (0.08) 0.005 (0.13) 0.004 (0.10) 0.006 (0.15) 0.005 (0.13) 0.008 (0.20) 0.007 (0.18) 0.009 (0.23) 0.012 (0.31) 0.014 (0.36) 0.010 (0.25) 0.015 (0.38) 0.020 (0.51) 0.017 (0.43) 0.018 (0.46)
Hardness and grain size of B168 UNS N06600 coil
Thickness, in. (mm) Over 0.050 to 0.250 (1.3 to 6.4), incl Sheet (56 in. (1.42 m) Wide and Under) Strip (12 in. (305 mm) Wide and Under)C Over 0.010 to 0.125 (0.25 to 3.2), incl 0.005D to 0.010 (0.13 to 0.25), incl
Average Grain Section Calculated Dia. , maximum, in. (mm) 0.0043 (0.110) 0.0030 (0.075) 0.0030 (0.075) 0.0009 (0.022)
Rockwell B, BA Hardness, Maximum 86 86 86 88E
Corresponding ASTM Micro Grain Size No 3.5 4.5 4.5 8E
B168 N06600 strip thickness tolerance
Specified thickness   Over 0.130(3.30) to 0.145(3.68), incl Over 0.098(2.49) to 0.114(2.90), incl Over 0.114(2.90) to 0.130(3.30), incl Over 0.145(3.68) to less than 3/16(4.76) Over 0.083(2.11) to 0.098(2.49), incl
Specified thickness   Over 0.040(1.02) to 0.058(1.47), incl Over 0.016(0.41) to 0.026(0.66), incl Over 0.026(0.66) to 0.040(1.02), incl Over 0.058(1.47) to 0.072(1.83), incl Over 0.007(0.18) to 0.016(0.41), incl
Over and under, permissible variations mm 0.30 0.23 0.25 0.36 0.20
  inch 0.012 0.009 0.010 0.014 0.008
Over and under, permissible variations mm 0.13 0.08 0.10 0.15 0.05
  inch 0.005 0.003 0.004 0.006 0.002
UNS Specifications International Specifications
N06600 AMS 5540, ASTM B168 DIN 17750, DIN 17742, TÜV 305, WERKSTOFF Nr 2.4816 AFNOR-NC 15 Fe, BS 3072-3076 (NA14), DIN 17754
Width permissible variations of B168m UNS N06600 strip and sheet
Strip
Specified Thickness, in. (mm)   Under 0.075 (1.9) 0.075 to 0.100 (1.9 to 2.5), incl Over 0.100 to 0.125 (2.5 to 3.2), incl Over 0.125 to 0.160 (3.2 to 4.1), incl Over 0.160 to 0.187 (4.1 to 4.7), incl Over 0.187 to 0.250 (4.7 to 6.4), incl
Specified Width, in. (mm) Up to 12 (305), Over 12 to 48 (305 to 1219), inc Up to 12 (305), incl Over 12 to 48 (305 to 1219), incl Up to 12 (305), incl Over 12 to 48 (305 to 1219), incl Up to 12 (305), incl Over 12 to 48 (305 to 1219), incl Up to 12 (305), incl Over 12 to 48 (305 to 1219), incl Up to 12 (305), incl Over 12 to 48 (305 to 1219), incl
Permissible Variations in Specified Width, in. (mm) + 0.007 (0.18) 0.062 (1.6) 0.009 (0.23) 0.062 (1.6) 0.012 (0.30) 0.062 (1.6) 0.016 (0.41) 0.062 (1.6) 0.020 (0.51) 0.062 (1.6) 0.062 (1.6) 0.062 (1.6)
- 0.007 (0.18) 0 0.009 (0.23) 0 0.012 (0.30) 0 0.016 (0.41) 0 0.020 (0.51) 0 0.062 (1.6) 0.062 (1.6)
Sheet
Specified Width, in. (mm) all
Specified Thickness, in. (mm) Up to 0.250 (6.35)
Permissible Variations in Specified Width, in. (mm) + 0.125 (3.18)
- 0
ASTM B168m UNS N06600 clad plate  delivery state
Delivery State Choice Hot Rolled / Solution & Aging T reated
Surface Condition No.1 No.3 No.4 6K 8K - - -
Delivery State Choice Cold Rolled / Solution & Aging T reated
Surface Condition 2B 2D BA Hairline No.3 No.4 6K 8K
Diameter permissible variations for ASME SB 168 UNS N06600 plate
Specified Diameter, in. (mm) Thickness, max, in. (mm) 2 to 3 (50.8 to 76.2), incl 3⁄16 to 2 (4.8 to 50.8), excl
    + +
28 to 32 (711 to 812), excl 2 (50.8) 5⁄8 (15.9) 0 1⁄2 (12.7) 0
40 to 140 (1020 to 3560), incl 3 (76.2) 5⁄8 (15.9) 0 1⁄2 (12.7) 0
20 to 22 (508 to 559), excl 23⁄4 (69.8) 5⁄8 (15.9) 0 1⁄2 (12.7) 0
22 to 24 (559 to 610), excl 21⁄2 (63.5) 5⁄8 (15.9) 0 1⁄2 (12.7) 0
19 to 20 (483 to 508), excl 3 (76.2) 5⁄8 (15.9) 0 1⁄2 (12.7) 0
24 to 28 (610 to 711), excl 21⁄4 (57.3) 5⁄8 (15.9) 0 1⁄2 (12.7) 0
34 to 38 (864 to 965), excl 11⁄2 (38.1) - - 1⁄2 (12.7) 0
32 to 34 (812 to 864), excl 13⁄4 (44.5) - - 1⁄2 (12.7) 0
38 to 40 (965 to 1020), excl 11⁄4 (31.8) - - 1⁄2 (12.7) 0

 

Specified Diameter, in. (mm)   108 to 140 (2740 to 3580), incl 32 to 84 (813 to 2130), excl 20 to 32 (508 to 813), excl 84 to 108 (2130 to 2740), excl
Over specified diameter for thickness given, in. (mm)A permissible variations To 3⁄8 ( 9.5), incl 7⁄16 (11.1) 5⁄16 (7.9) 1⁄4 (6.4)  3⁄8 (9.5)
B168m N06600 shim sheet width and length tolerance
  3/8 to 1/2 in. incl in Thickness Under 3/8 in. Thickness Over 1/2 to 1 in. Thickness
Width in. [mm] length in. [mm] Length Width Length Width Length Width
Over 84 to 108 incl   7/16 3/8 3/8 5/16 9/16 1/2
Over 108   1 11/16 7/8 5/8 1 7/8
Over 108   1/2 7/16 7/16 3/8 11/16 5/8
48 and under   1/2 1/4 3/8 3/16 5/8 5/16
Over 60 to 84 incl over 144 to 240 11/16 7/16 1/2 3/8 3/4 1/2
Over 48 to 60 incl   5/8 5/16 7/16 1/4 3/4 3/8
Over 48 to 60 incl   3/4 3/8 5/8 5/16 3/4 1/2
Over 84 to 108 incl   3/4 1/2 9/16 7/16 7/8 5/8
Over 108   7/8 5/8 5/8 1/2 1 11/16
Over 48 to 60 incl   5/16 1/4 1/4 3/16 7/16 3/8
48 and under   5/8 5/16 1/2 1/4 3/4 3/8
Over 60 to 84 incl over 240 to 360 3/4 1/2 11/16 7/16 7/8 5/8
Over 60 to 84 incl 144 and under 3/8 5/16 5/16 1/4 1/2 7/16
48 and under   1/4 3/16 3/16 1/8 3/8 5/16
Over 84 to 108 incl   7/8 5/8 3/4 9/16 1 3/4
Impact strength of ASTM B168m N06600 annealed plate
Orientation Impact Strength Temperature
ft-lb J °F °C
Longitudinal 61.7 83.7 70 21
67.0 90.8 -110 -79
61.3 83.1 -320 -196
Transverse 63.5 86.1 70 21
65.5 88.8 -110 -79
60.8 82.4 -320 -196
Value added services
  • Shearing
  • Edge preparation
  • Sawing
  • Bending
  • Slitting
  • Welding
  • Polishing
  • Mechanical processing
  • Cutting to length
  • Blanking
Trying to locate ASTM B168 hot rolled plate and shim stock in an unique size? No need to worry, you can now buy online at dealer prices. and examine its properties
UNS N06600 annealed plate chemical properties
Grade Cr S Ni Fe Mn C Si P Cu
Inconel 600 Min %. 14 6
Max%. 17 0.015 72 10 1 0.15 0.5 0.015 0.5
B168 UNS N06600 strip equivalent
GRADE OLD BRITISH JIS UNS G0ST AFNOR OR
Inconel 600 EN BS NCF 600 N0600 XH60BT NC15FE11M ЭИ868
NiCr15Fe NA 14
ASTM B168 N06600 foil mechanical properties
Element Tensile Strength Melting Point Yield Strength (0.2%Offset) Density Elongation
Inconel 600 Psi – 95,000 , MPa – 655 1413 °C (2580 °F) Psi – 45,000 , MPa – 310 8.47 g/cm3 40 %
Strips packaging Coils packaging Sheet and plate packaging
  • Carton Box
  • Wood Reel
  • Wooden Pallet
  • Plastic Bag
  • Wooden Pallet
  • Film
  • Brown Paper
  • Wooden Pallet
  • Brown Paper
  • Heat treatment
  • Nuclear engineering
  • Food processing
  • Aerospace
  • Paper industry 
  • Gas Turbine components
What are the advantages of utilizing UNS N06600 annealed plate?
  • Annealing helps to relieve the stress of UNS N06600 plates that might have built up due to welding, forging, etc.
  • The process softens the material and recrystallizes to form a finer grain structure. Thus, the UNS N06600 annealed plates have high ductility, machinability, and other mechanical properties.
  • The annealed plate have optimized microstructure which can improve the magnetic properties of the material.
How is ASME SB168 N06600 plate manufacture?
  • Inconel 600 material is melted in a furnace and cast into large ingots.
  • They are reheated and hot rolled, which improves the mechanical properties of the material and help achieve the desired dimensions. Sometimes, cold rolling is done for better results.
  • Annealing relieves material stress, promotes grain growth and improves the ductility of ASME SB168 N06600 clad plate.
  • The plates are finally cut and given desired finish to improve the surface appearance.
What are the ASTM B168 hot rolled plate's typical dimensions?

The typical dimensions of ASTM B168 hot rolled plate would include:

  • Thickness with 4-50 mm or more
  • Narrow width is 600mm or more, standard width is 1000 mm or more and wide width is 1500mm and above.
  • The standard length can be 2000mm or above. The length can also be customized as per the client specific requirements.
close