Hastelloy C22 Pipe Fittings

  • Home
  • Hastelloy C22 Pipe Fittings
Hastelloy C22 Pipe Fittings
What is Hastelloy c22 pipe fittings? How do you secure it?

The pipe fittings made from Hastelloy C22 are made from Ni-Cr-Mo alloy, showing good corrosion resistance. The Hastelloy c22 pipe fittings can connect and secure pipes, to ensure leakage free and reliable fluid or gas flows. Hastelloy C22 material shows exceptional resistance to different corrosive environments like acids, chlorides and oxidizing agents.

Welding, threading or using compression fittings can be used to secure Hastelloy c22 fittings. Welding helps permanently join the fittings to the pipes using heat while threading creates a screwed connection. Compression fittings have a compression ring to tighten and seal the Hastelloy c22 buttweld fittings onto the tube. The specific method used for fastening depends on both application & system requirements.

Table of content

We are one of India's largest and highest-quality manufacturer of alloy c22 elbow

What is the difference between alloy c22 high pressure and low pressure fittings?

The difference between alloy C22 high and low pressure fittings is in their design. They are made to handle different pressure levels within a piping system. High pressure nickel alloy c22 reducing tee can withstand and contain fluids or gases under high pressure conditions. They have thicker walls, reinforced structures and reliable sealing mechanisms to ensure efficient performance in demanding applications. Low pressure nickel alloy c22 concentric reducer has lighter construction, thinner walls and simpler sealing mechanisms suitable for less demanding environments.

When ASTM B366 UNS N06022 reducer and tee is available here in the exact size and many types, why spend more? now obtain quote

Alloy c22 elbow

Alloy c22 elbow

UNS N06022 tee

UNS N06022 tee

DIN 2.4602 reducer

DIN 2.4602 reducer

How can I determine my Hastelloy c22 fittings proper size?

To determine the proper size of WNR 2.4602 equal tee, several factors within your piping system are considered:

  • Determine the nominal pipe size (NPS) by measuring the outer diameter of the pipe or referring to the manufacturer's specifications.
  • Select the corresponding alloy c22 seamless fittings size. Ensure compatibility between the fitting size and the pipe size for a proper connection.
  • Consider specific application requirements like flow rate & pressure which might influence the selection of the size of the ASME SB366 nickel c22 pipe bend.

As a supplier and stockist, we provide Hastelloy c22 buttweld fittings in Mumbai in sizes ranging from 1/2′′ to 48′′ (welded) and 1/2′′ to 10′′ (seamless) , see complete specification

Hastelloy c22 pipe fittings specification
NPS Hastelloy c22 fittings Schedule Standard
½ to 48 inch Sch 5 to XXS ASME B16.9
Hastelloy c22 fittings Specification Form Hastelloy c22 fittings Surface
ASTM B366 Elbow, Tee, Reducer, Stub End, Pipe Cap Pickled, Polished
Please get in touch with us if you want any help for DIN 2.4602 seamless fittings, including pipe bend, stub end, caps, and cross required to finish your project.
Most selling types of alloy c22 buttweld fittings
Nickel alloy c22 stub end

Nickel alloy c22 stub end

  • ANSI/ASME B16.28
  • MSS-SP-43
  • ANSI/ASME B16.9
ASTM B366 Hastelloy c22 pipe cap

ASTM B366 Hastelloy c22 pipe cap

  • Radius 2D, 1D
  • 5D, 3D, 6D,
  • 10D, 8D
WNR 2.4602 pipe cross

WNR 2.4602 pipe cross

  • Ultrasonic flaw detector
  • Direct-reading Spectrograph
  • Magnetic particle detector
Together with value-added services, we provide ASME SB366 nickel alloy c22 reducing/equal tee, concentric/eccentric reducer etc. learn more about its technical properties
ASTM B366 UNS N06022 tee equivalent
STANDARD UNS EN JIS GOST WERKSTOFF NR. OR
Hastelloy c22 fittings N06022 NiCr21Mo14W NW 6022 2.4602
Nickel alloy c22 elbow mechanical properties
Element Tensile Strength Melting Point Yield Strength (0.2%Offset) Density Elongation
Hastelloy c22 fittings Psi – 1,00,000 , MPa – 690 1399 °C (2550 °F) Psi – 45000 , MPa – 310 8.69 g/cm3 45 %
DIN 2.4602 reducer chemical properties
Grade Mo P Mn C Si S Co Ni Cr Fe
Hastelloy c22 fittings 12.50 – 14.50 0.02 max 0.50 max 0.010 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00
Hastelloy alloy c22 elbow manufacturing process
Hastelloy alloy c22 elbow manufacturing process
WP grades classes for WNR 2.4602 equal tee
Construction Hastelloy c22 fittings Class Non-destructive Examination
Welded WU Ultrasonic
Welded W Radiography or Ultrasonic
Seamless S None
Welded WX Radiography
Dimensions of Hastelloy alloy c22 fittings
Hastelloy c22 fittings Nominal Pipe Size All fittings All fittings 180° Return Bends 180° Return Bends 180 Deg Return Bends Reducers Elbows/ Tees Caps
O.D. at Bevel (1), (2) NPS Wall Thickness (3) I.D. at End
(1), (3), (4)
Back-to-Face K Centre-to-Centre O Ends U Alignment Overall Length H Dimension A,B,C,M Centre-to-End Overall Length E
0.06 3 to 3 ½ Not less than 87.5% of nominal thickness 0.06 0.25 0.25 0.03 0.06 0.06 0.12
0.06
-0.03
½ to 2½ Not less than 87.5% of nominal thickness 0.03 0.25 0.25 0.03 0.06 0.06 0.12
0.06 4 Not less than 87.5% of nominal thickness 0.06 0.25 0.25 0.03 0.06 0.06 0.12
0.16
-0.12
10 to 18 Not less than 87.5% of nominal thickness 0.12 0.25 0.38 0.06 0.09 0.09 0.25
0.09
-0.06
5 to 8 Not less than 87.5% of nominal thickness 0.06 0.25 0.25 0.03 0.06 0.06 0.25
0.25
-0.19
26 to 30 Not less than 87.5% of nominal thickness 0.19 0.19 0.12 0.38
0.25
-0.19
20 to 24 Not less than 87.5% of nominal thickness 0.19 0.25 0.38 0.06 0.09 0.09 0.25
0.25
-0.19
32 to 48 Not less than 87.5% of nominal thickness 0.19 0.19 0.19 0.38
Schedule chart of alloy c22 seamless fittings
DN Hastelloy c22 fittings Schedule 40S Schedule 10S
90° Elbow 45° Elbow End cap Equal tee Stub end type (B) 90° Elbow 45° Elbow Stub end type (B) Equal tee End cap
20 0.08 0.04 0.07 0.17 0.11 0.07 0.03 0.09 0.13 0.05
15 0.08 0.04 0.04 0.10 0.08 0.06 0.03 0.07 0.09 0.03
25 0.15 0.11 0.10 0.29 0.17 0.14 0.08 0.16 0.28 0.08
40 0.40 0.23 0.20 0.86 0.31 0.30 0.17 0.25 0.68 0.11
32 0.26 0.17 0.18 0.59 0.25 0.23 0.11 0.22 0.49 0.10
50 0.70 0.40 0.23 1.28 0.61 0.50 0.25 0.43 0.85 0.13
80 2.20 1.08 0.42 3.31 1.13 1.25 0.63 0.72 1.77 0.25
65 1.40 0.77 0.27 2.19 0.80 0.85 0.48 0.57 1.41 0.19
100 4.47 1.47 1.14 5.27 1.87 2.10 1.08 1.09 3.46 0.68
150 10.89 5.44 3.23 10.99 3.57 5.45 2.72 2.15 8.03 1.42
125 6.80 2.84 2.13 9.63 2.79 3.65 1.82 1.47 5.44 1.11
200 21.54 10.77 5.19 20.91 6.07 10.20 5.33 3.22 15.65 2.38
300 59.42 29.71 15.00 62.14 14.29 25.80 13.62 8.16 39.46 7.50
250 38.56 19.27 9.00 35.38 10.07 18.15 9.75 5.13 26.76 4.45
400 99.79 45.81 21.00 99.79 20.41 47.63 23.81 12.70 58.97 10.67
350 79.38 35.15 16.00 79.31 17.14 36.29 18.37 10.88 48.53 8.17
500 162.38 74.84 34.00 162.39 29.94 99.80 49.90 21.77 103.42 17.00
450 129.73 59.40 26.00 129.73 27.21 59.87 29.94 17.23 79.65 13.00
600 225.89 105.23 52.00 225.90 38.55 140.61 70.31 27.21 155.58 26.00
Hastelloy c22 fittings pressure rating
Ratings of Temperature Hastelloy c22 fittings Class of Pressure
150 300
1/4 - 1 Inches 1 1/4 - 2 Inches 2 1/2 - 3 Inches
(oC) (oF)
93 200 265 1785 1350 910
-29 to 66 -20 to 150 300 2000 1500 1000
149 300 185 1360 1050 735
121 250 225 1575 1200 825
204 400 - 935 750 560
177 350 150 1150 900 650
260 500 - 510 450 385
232 450 - 725 600 475
288 550 - 300 300 300
Physical properties of ASME SB366 nickel c22 pipe bend
HASTELLOY C22 FITTINGS MELTING POINT (°C) 1351 – 1387
DENSITY (LB/IN 3) 0.311
HASTELLOY C22 FITTINGS DENSITY (G/CM 3) 8.61
MELTING POINT (°F) 2464 – 2529
What are the different types of UNS N06022 pipe fittings?

There are different types of Hastelloy alloy c22 fittings, like:

  • Elbows can change the pipe flow direction
  • ASTM B366 UNS N06022 tee helps to branch the pipe into two or more directions
  • Reducers can connect pipes of different diameters
  • A coupling can join two pipes of the same size

There are several other fitting types used in the piping system. They are chosen as per the specific application and system requirements.

What aspects are most vital to bear in mind when purchasing alloy c22 elbow?

When purchasing an alloy C22 elbow, several factors are to be considered:

  • The material should be genuine which will ensure its corrosion resistance properties.
  • Determine the appropriate elbow size by considering the OD and the desired angle of the pipe bend.
  • The wall thickness and pressure rating of the elbow should be on par with the system requirements.
  • Evaluate factors like temperature, fluid composition and environmental conditions to ensure compatibility with the application.
  • Always source the products from reputable manufacturers like Regent Steel & Engineering Co. They adhere to the industry standards guaranteeing the quality and reliability of the elbow.
How are DIN 2.4602 pipe fittings measured ?

DIN 2.4602 pipe fittings are measured using standard dimensions & specifications. The measurements are based on key parameters like OD and wall thickness, which determine the nominal pipe size. The NPS determines the right Hastelloy c22 pipe cross size for proper compatibility and connection. All the dimensions are specified according to industry standards & specifications.

FAQ
Is Hastelloy c22 pipe fittings compatible with hydrochloric acid?

excellent corrosion resistance in dry/wet HCl gases

What is the temperature range of alloy c22 fittings?

510 to 1038°C (950 to 1900°F)

Where UNS N06022 buttweld fitting use ?

high temperature application

Which is better fittings C22 or C276?

C-22 has better overall corrosion resistance compared to C-276

Does nickel alloy c22 elbow exhibit weldability ?

excellent weldability

close