Hastelloy C22 Plate

Hastelloy C22 is a nickel, chromium and molybdenum alloy that shows enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The Hastelloy c22 plate can resist the formation of grain boundary precipitate in the heat affected weld zone. Thus, they are suitable for use in as-welded conditions. The alloy c22 can resist both oxidizing and reducing media along with harsh environments.

The C22 material can be easily cold welded as it has high ductility. They are generally stiffer than the austenitic ss grades and can be heat treated at 2050 °F. The Nickel alloy c22 plates are mostly available. They have high thermal stability and good workability against corrosive environments. Due to these properties, the plates can be used in industries like construction, shipbuilding, petrochemical, offshore & onshore, etc.

We are the supplier of alloy c22 sheet in India with the lowest price as per ASTM B575. know its drawbacks

• The Hastelloy C22 sheet has nickel, chromium and molybdenum in its alloy, which are quite expensive. Hence the price of the sheet is on the higher side.
• The welding technique for the C22 sheet must be properly selected to avoid sensitization or formation of harmful phases in the heat affected zone.
• C22 material is not suitable for extreme conditions like highly concentrated hydrochloric or sulfuric acids.
• The ASME SB575 NW 6022 shim sheet has limited availability and might require more delivery time.

We are oldest ASTM B575 UNS N06022 strip stockist in Mumbai, check why Werkstoff NR. 2.4602 coil appropriate for marine application ?

Hastelloy c22 sheet

Alloy c22 coil

UNS n06022 strip

The composition of the Alloy C22 plate is such that it can withstand chloride ion induced stress corrosion cracking, pitting and crevice corrosion. The high molybdenum content improve its resistance to the seawater environment. C22 can also resist oxidizing and reducing environments, which means they can tackle unpredictable marine situations.

We keep an inexpensive stock of ASME SB575 alloy c22 plate in sizes ranging from 2mm to 15mm, or we may create a custom order also with prompt delivery.

The most recent price list for cut-to-size nickel alloy c22 foil and shim sheet in a range of thicknesses is available on our website, explore more available types

Nickel alloy c22 plate

• CR, HR, 2B
• BA, 2D, NO(8)
• SATIN

Werkstoff nr. 2.4602 foil

• Thickness: 0.1 to 100 mm
• Width: 10-2500mm
• Length: upto 3 meter or custom

Hastelloy alloy c22 shim sheet

• Quarter Hard
• Half Hard
• Spring Hard

We only offer the best-quality haynes alloy c22 clad plate in a variety of finishes online, see hastelloy alloy c22 cold rolled plate mechanical and chemical properties

The Alloy C22 sheet material is quite expensive due to its chemical composition and mechanical properties. However, the exact price of ISO 6208 sheet varies with the supplier, their internal costings and market conditions. The cost is also dependent on the size & dimensions, customization required, quantity ordered and location. You can contact reputed C22 sheet manufacturers like Regent Steel & Engineering Co. who offer high quality, customized products at competitive rates.

If you want to know what Is the difference between Hastelloy C22 And C276, then consider the following:

• C22 has lower molybdenum and higher chromium content. C22 and C276 have different content of the same elements and hence their properties are also different.
• Haynes alloy C22 foil offers better corrosion resistance properties than C276.
• C22 has good weldability whereas C276 is hard to weld.
• C276 has a wider temperature range than Werkstoff NR. 2.4602 Coil, which can be used up to 2282 °F.

The readings on the Hastelloy C22 plate weight calculator can vary with the thickness. The standard C22 plate thickness ranges between 0.5-6 mm and more, depending on specific application requirements. Typically, their hardness range between 20 to 30 HRC when solution annealed. However, the hardness can change depending on cold working and heat treatment.

excellent weldability

between 1750-2050° F

at break up to 48%

between 2020-2150° F

shielded metal arc welding