India's Largest Stockist and Supplier Of Nickel Alloys Since 2007

Incoloy 800 Pipe Fittings

Incoloy 800 Pipe Fittings Key Information
Ex.Stock
  • Seamless Fittings: 1/2 to 10″
  • Welded Fittings: 1/2 to 48"
Custom Size Yes
HS Code 73072900
MTC EN 10204 3.1 and 3.2
Technique Hot Or Cold Pressed
Elbow Angle 45, 90, 180 Degree
Process Seamless,  Buttweld ,Welded
Bending Radius 8D, 2D, 1D, 3D, 6D, 10D, 5D
Heat Treatment Quenched, Tempered, Annealed
End PE, BE
Delivery Time
  • Bhutan: 7 Days
  • Nepal: 7 Days

For Most Updated Incoloy 800 Pipe Fittings Price  Click Here To Get Free Quote

 

Incoloy 800 Pipe Fittings Specification

 

ASTM B366 UNS N08800 Elbow and Tee Manufacturer in India With MTC

Incoloy 800 Pipe Fittings Certifications
  • ISO 15156
  • Sour service
  • NACE MR0175
  • HIC tested
  • NACE TM-0284
  • NORSOK
  • IBR
  • MTC EN 10204 3.1/3.2
  • NACE MR0103

 

Alloy 800 Elbow

Alloy 800 Elbow

ASTM B366 UNS N08800 Tee

ASTM B366 UNS N08800 Tee

WNR 1.4876 Reducer

WNR 1.4876 Reducer

Table of content
Regent Steel & Engineering Co.
Incoloy 800 Pipe Fittings Specification
Incoloy 800 Pipe Fittings Sizes
Incoloy 800 Pipe Fittings Sizes
  • Seamless:1/2 to 10"
  • Welded :1/2 to 48"
  • Schedule:Sch 5 to XXS
  • Custom
Alloy 800 Elbow Types
Types Of Alloy 800 Elbow
  • Elbow
  • Stub End
  • Cap
  • Tee
  • Reducer
ASTM B366 UNS N08800 Tee Process
ASTM B366 UNS N08800 Tee Process
  • Seamless
  • Mandrel and Hot Forming
  • Buttweld
  • Welded
WNR 1.4876 Reducer Bending Radius
WNR 1.4876 Reducer Bending Radius
  • 5D
  • 3D
  • 4D, 10D
  • 8D
  • 6D
Nickel Alloy 800 Cap Schedule
Nickel Alloy 800 Cap Schedule
  • Sch 10, 20, 30
  • Sch 140
  • Sch 160
  • Sch 100, 120
  • Sch 40, 60, 80
Inconel 800 Stub End Bending Method
Inconel 800 Stub End Bending Method
  • Hot Induction Bending
  • Rotary Draw Bending
  • Roll and Mandrel Bending
  • Ram-Type Bending
Alloy 800 Collar Trade Name
Alloy 800 Collar Trade Name
  • Ferrochronin® 800
  • Nickelvac® 800
  • Nicrofer® 3220
Incoloy 800 Pipe Fittings Standards
Incoloy 800 Pipe Fittings Standards
  • ASTM B366 | ASME SB366
  • Other:MSS-SP-43, ASME/ANSI B16.9, B16.28
  • WNR: 1.4876
  • UNS: N08800
Ferrochronin® 800 Nipple Testing
Ferrochronin® 800 Nipple Testing
  • Ultrasonic
  • PMI 
  • HIC
  • IGC
Nickelvac® 800 Cross Finish
Nickelvac® 800 Cross Finish
  • Sand Blasting
  • Pickled
  • Polished
Incoloy 800 Coupling Properties
Incoloy 800 Coupling Properties
  • Melting Point:1357-1385°C | 2475-2525°F
  • Temp.:1500°F (816°C)
  • Density:7.94 g/cm³
Alloy 800 Collar End
Alloy 800 Collar End
  • Compound Bevel
  • Buttweld Bevelled
  • Plain Bevel
ASTM B366 UNS N08800 Tee Manufacturing Dimensions
ASTM B366 UNS N08800 Tee Manufacturing Dimensions
  • ANSI B16.9
  • MSS-SP-43
  • ASME B16.28
WNR 1.4876 Reducer Services
WNR 1.4876 Reducer Services
  • Cutting
  • Heat Treatment
  • Shearing
  • Custom Packaging
Nickel Alloy 800 Cap Origin
Nickel Alloy 800 Cap Origin
  • Korean
  • European
  • American
  • Janpanese

Nickel Alloy 800 Buttweld Fittings Supplier in Mumbai With Size 1/2 to 48" (welded) and 1/2 to 10″(seamless)

Alloy 800 Elbow Size Chart
  Welded Fittings Seamless Fittings
Tees fittings Upto 36" Upto 24"
Elbows Upto 42" Upto 24"
Cross fittings Upto 36" Upto 8"
Reducers Upto 48" Upto 24"
Return Bends   Upto 8"
End Caps   Upto 24"
Swage Nipple   Upto 4"
Special Fittings: Piggable Bends, 5D, 3D, 10D etc.
Miter Bends, Customized Bends,		 As per drawings and datasheets of customer
Incoloy 800 Reducer Dimension Chart
OUTSIDE
DIAMETER		 NOMINAL
PIPE SIZE		 REDUCERS
(mm) (inches) Reduced from
(inches)		 Concentric & Eccentric Length
(inches)		 Reduced to
(inches)
21.3 0.840 1/2 1 1/2 1/4
1 1/2 3/8
26.7 1.050 3/4 2 3/8
2 1/2
33.4 1.315 1 2 3/8
2 1/2
2 3/4
42.2 1.660 1 1/4 2 1/2
2 3/4
2 1
48.3 1.900 1 1/2 2 1/2 1/2
2 1/2 3/4
2 1/2 1
2 1/2 1 1/4
60.3 2.375 2 3 3/4
3 1
3 1 1/4
3 1 1/2
73.0 2.875 2 1/2 3 1/2 1
3 1/2 1 1/4
3 1/2 1 1/2
3 1/2 2
88.9 3.500 3 3 1/2 1
3 1/2 1 1/2
3 1/2 2
3 1/2 2 1/2
101.6 4.000 3 1/2 4 1 1/4
4 1 1/2
4 2
4 2 1/2
4 3
114.3 4.500 4 4 1 1/2
4 2
4 2 1/2
4 3
4 3 1/2
141.3 5.563 5 5 2
5 2 1/2
5 3
5 3 1/2
5 4

Keep Bulk Stock of WNR 1.4876 Reducer With Sch 10 to Sch 160 For High Temperature Applications

Applications of Incoloy 800 Pipe Fittings
Applications of Incoloy 800 Pipe Fittings  
ASTM B366 UNS N08800 Tee Schedule Chart
DN For ASME B16.9 Schedule 10S Schedule 40S
Concentric Reducer Eccentric Reducer Reducing , Unequal Tee Concentric Reducer Eccentric Reducer Reducing - Unequal Tee
100*50 0.78 0.78 2.94 1.50 1.50 4.48
100*80 0.87 0.87 3.04 1.74 1.74 4.64
150*80 1.82 1.82 6.86 3.95 3.95 9.68
50*40 0.31 0.31 0.76 0.45 0.45 1.15
80*.50 0.55 0.55 1.56 1.00 1.00 2.91
200*100 3.01 3.01 13.46 6.55 6.55 17.98
150*100 1.96 1.96 7.10 4.07 4.07 11.94
40*.25 0.19 0.19 0.60 0.26 0.26 0.76
50*25 0.28 0.28 0.73 0.40 0.40 1.10
200*150 3.19 3.19 14.08 6.74 6.74 18.82
Most Common Types Of Incoloy 800 Pipe Fittings
Alloy 800 Collar

Alloy 800 Collar

Nickel Alloy 800 Cap

Nickel Alloy 800 Cap

Inconel 800 Stub End

Inconel 800 Stub End

Ferrochronin® 800 Nipple

Ferrochronin® 800 Nipple

Nickelvac® 800 Cross

Nickelvac® 800 Cross

Incoloy 800 Coupling

Incoloy 800 Coupling


Buy Inconel 800 Cap and Stub End Online Produced By Hot Forming and Mandrel Method As Per ANSI B16.9
Nickel Alloy 800 Cap Methods
  • Hot Forming
  • Machining
  • Welding
  • Heat Treatment
  • Mandrel
Equivalent Chart of Incoloy 800 Buttweld Fittings
STANDARD UNS OR WERKSTOFF NR. JIS BS GOST AFNOR EN
Incoloy 800 Fittings N08800 XH32T 1.4876 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20
Inconel 800 Stub End Tolerance Chart
Alloy 800 Fittings Tolerance Reducer
& Lap Joint
Stub End
Elbows And Pipe Tee		 Pipe End Caps
ASME B16.9 Normal Pipe Size ID
at End		 OD
at Bevel		 Alloy 800 Fittings Wall Thickness Of T Over-all
Length Of H		 Center-to-End
Dimension
A ,C ,B		 Over-all
Length Of F
1/2 to 2-1/2 +0.06 Not less than 87.5%
of nominal thickness		 +/- 0.06 +/- 0.06 +/- 0.12
-0.03
3 to 3-1/2 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.12
4 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.12
5 to 8 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.25
10 to 18 +/- 0.12 +0.16 +/- 0.09 +/- 0.09 +/- 0.25
-0.12
20 to 24 +/- 0.19 +0.25 +/- 0.09 +/- 0.09 +/- 0.25
-0.19
26 to 30 +/- 0.19 +0.25 +/- 0.19 +/- 0.12 +/- 0.38
-0.19
32 to 48 +/- 0.19 +0.25 +/- 0.19 +/- 0.19 +/- 0.38
           
-0.19
WNR 1.4876 Reducer Chemical Composition

Nickel

35.00%

Carbon

0.10%

Aluminium

0.60%

Manganese

1.50%

Chromium

23.00%

Sulfur

0.015%
Find Japanese Origin Ferrochronin® 800 Cross and Nipple Ideal to Work At 1500°F Temperature
Ferrochronin® 800 Nipple Pressure Rating
Pressure-Temperature for Incoloy Pipe Fittings (psig)
Temperature Ratings Pressure Class
150 300
1/4 - 1 " 1 1/4 - 2 " 2 1/2 - 3 "
(oF) (oC)
-20 to 150 -29 to 66 300 2000 1500 1000
400 204 - 935 750 560
450 232 - 725 600 475
250 121 225 1575 1200 825
300 149 185 1360 1050 735
350 177 150 1150 900 650
500 260 - 510 450 385
200 93 265 1785 1350 910
550 288 - 300 300 300
Nickelvac® 800 Cross Mechanical Properties
Element Elongation Density Yield Strength (0.2%Offset) Melting Point Tensile Strength
800 Fittings 30 % 7.94 g/cm3 Psi - 30,000 , MPa - 205 1385 °C (2525 °F) Psi - 75,000 , MPa - 520
Incoloy 800 Coupling Physical Properties
800 Fittings  Density Specific Heat Melting Range Electrical Resistivity
  g/cm3 J/kg. k Btu/lb.°F °F °C µΩ·m
  7.94 460 0.110 2475-2525 1357-1385 989
How do you properly identify UNS N08800 tee?

Here is how you can identify it:

 
  • Dimensions size
  • Wall thickness
  • Certifications
What makes DIN 1.4876 class 150 fitting different from a class 300 fitting?
  • Pressure Rating
  • Thickness
  • Dimension
  • Product weight
  • Durability
What factors should be considered when choosing alloy 800 elbow ?
  • Material Quality
  • Size Customization
  • Certifications
  • Temperature range
  • Shipping time
What are the material testing of incoloy 800 pipe fittings ?
what-are-the-material-testing-of-incoloy-800-pipe-fittings  
FAQ
What is the machinability of incoloy 800 fittings ?

Machinability of incoloy 800 fittings is 50%

What are types of packaging of alloy 800 fittings ?
  • Wooden Boxes
  • Carton boxes
  • Shrink-wrapped
What is melting range of alloy 800 elbow ?

1357-1385°C

Which welding method used for Incoloy 800 buttweld fittings ?

Gas tungsten arc welding (GTAW)

Incoloy 800 Pipe Fittings Delivery Time As Per Country
Cost Changes
5 % extra
Export to Delivery Time
Germany 20
Azerbaijan 30-45 days
Qatar 7
Kuwait 10
Sweden 45
USA 40-60
Bangladesh 15
Oman 5
South Africa 25-30
Italy 30
Nepal 7
France 30
Philippines 14
Sri lanka 5
Bangladesh 14
Regent Steel

Why Should You Buy From Regent Steel ?

  • Distributor of Renowned Mills of Nickel Alloys in Europe and USA
  • Experience of 2 Decades as a Supplier of High Temperature Alloys in Dubai ( UAE), Saudi Arabia and Africa.
  • Largest Stockist of Nickel Alloy Flat Products in Mumbai
  • Ready Stock of Sheets, Coils, Strips and Bars in Over 50 Sizes at Al Jubail, Abu Dhabi, Muscat and South Africa
  • Facility of Cut to Size at No Extra Cost.
  • Weekly Delivery to Nigeria, Qatar, Dammam, Sharjah and Singapore
  • NACE Certified Material at Dealer Price.
  • Resale Price for Traders, Wholesalers, Importers and Stockholders in Mena Countries
  • Data Sheets and MTC Along With Quote.
  • Free Sample, Latest Price List on Request
  • Renowned Supplier in Heat Exchangers, Instrumentation, and Oil and Gas Industry
  • Compare Weight Chart and Price Per Kg in China and India.

Incoloy 800 Products

Check Our Product Range

Get in touch

Call

+91-22-6639 4858

Email

export@regentsteel.com

close

© Copyright Regent Steel & Engg.Co. 2026. All Right Reserved.