Inconel 600 flanges

  • Home
  • Inconel 600 flanges
inconel 600 flanges
What is Inconel 600 flanges?

For dealing with high temperature resistance, we use a material composed of high contents of Nickel and Chromium which is Inconel 600 flanges. It also provides high corrosion resistance with temperature range from cryogenic to extreme temperatures up to 2000° F.

Also, to meet any performance or application requirements, in other words, with respect to basic requirements, this material is used in industries. Presence of high nickel contents is also one of the reasons why 600 Inconel provide resistance to corrosion from organic and inorganic compounds and make them immune to chloride-stress corrosion cracking. These types of flanges can only be hardened by cold work.

Table of content

We are extremely reliable alloy 600 flanges manufacturer in India according to ASTM B564, check its advantages

What are the advantages of using alloy 600 flanges?

There are numerous advantages that alloy 600 flanges deliver which meet both basic and extreme industrial standards. Added advantage of providing excellent and prominent corrosion resistance than other grade, this material is also suitable for sulphuric and hydrochloric acid environments.

It is also known to have high tensile strength and good yield strength at annealing temperatures. But as soon as this material is exposed to high temperatures, it shows remarkable results. Also, it shows resistance to sea water and chloride stress corrosion cracking.

As Supplier our primary focus is on the supply, stock, and timely delivery of custom UNS N06600 blind and slip on flange in Mumbai. know how do Inconel 600 and Inconel 625 flanges differ?

Alloy 600 flanges

Alloy 600 flanges

ASTM B564 UNS N06600 flange

ASTM B564 UNS N06600 flange

DIN 2.4816 weld neck flange

DIN 2.4816 weld neck flange

How do Inconel 600 and Inconel 625 flanges differ?

Distinctive properties are delivered when comparing Inconel 600 and 625. Though both the components comprise Nickel, they have many differing chemical compositions. 600 Inconel threaded flange is composed of Nickel, Chromium and Iron. Whereas on the other hand Inconel 625 is composed of Nickel, Chromium, Molybdenum and Niobium.

600 Inconel is a standard material for situations which require high resistance to corrosion and heat, while Inconel 625 is used in industries because of its excellent strength, excellent fabricability and good corrosion resistivity. When viewing the chemical compositions, alloy 625 has less impure elements, as a result, they have high purity.

Fully authorised stockist of DIN 2.4816 forged and weld neck flange with metric size ranging from ½” to 36″and pressure class 150 to 2500 use for high temp application

Alloy 600 flanges specification
inconel 600 flanges specification


Pressure Size Standard
PN6 to PN64 1/2 " to 48" NB ANSI/ASME B16.5, B16.47 Series A & B
Class Inconel 600 Flange Specification Face type
150, 300, 600, 900, 1500, 2500 ASTM B564 | ASME SB564 FF, RF, RTJ, Tongue & Groove
Type Coating Application
blind, weld neck, slip on, socket weld zinc plated, oil black paint, anti rust furnace components
You have the opportunity to purchase inconel 6600 lap joint and socket weld flange as per ANSI/ASME B16.5 at a low cost only here; shop for various types online to cut costs
What are types of nickel alloy 600 flanges ?
Inconel alloy 600 slip on flange

Inconel alloy 600 slip on flange

  • Size: 1/2 to 60 inch NB
  • ASTM B564 | ASME SB564
  • 150# to 2500#
Nickel alloy 600 blind flange

Nickel alloy 600 blind flange

  • Flate Face
  • Raised Face
  • Ring Type Joint
Werkstoff 2.4816 lap joint flange

Werkstoff 2.4816 lap joint flange

  • PN10, PN6
  • PN25, PN16
  • PN64, PN40
We can assist you with all of your nickel alloy 600 reducing, plate, threaded flange etc stock supply requirements, View its various properties here.
DIN 2.4816 weld neck flange chemical properties
Grade Cr S Ni Fe Mn C Si P Cu
Inconel 600 Min %. 14 6
Max%. 17 0.015 72 10 1 0.15 0.5 0.015 0.5
UNS N06600 blind flange mechanical properties
Grade Tensile Strength Melting Point (0.2%Offset) Yield Strength Density Elongation
Inconel 600 MPa – 655, Psi – 95,000 1413 °C (2580 °F) MPa – 310, Psi – 45,000 8.47 g/cm3 40 %
Inconel 6600 slip on flange equivalent
Inconel 600 EN BS NCF 600 N0600 XH60BT NC15FE11M ЭИ868
NiCr15Fe NA 14
What are the machinability characteristics of UNS N06600 flange?

Along with good tensile strength at high temperatures, several machinability characteristics of UNS N06600 flange are exhibited. It has excellent cutting force and high cutting temperatures, which is 1.5 or 2 times larger than carbon steel. But when it faces severe wear and tear, it results in shorter life span. During machining, it exhibits serious work hardening. It also becomes very difficult to dispose the chips during this process.

What welding techniques are used for Inconel alloy 600 blind flanges?

There are many techniques by which you can weld ASTM B564 UNS N06600 blind flange. But there is one welding technique which is not only precautionary, but is also very easy to be performed, which is Gas Tungsten Arc Welding. It is also known by the name of Plasma Arc Welding. This technique is used because this material has high-temperature strength and excellent corrosion resistance. This is also a solution to strong, clean welds in applications where this material is a must to be used.

How much do nickel alloy 600 slip on flanges cost?

Ideal pricing of Inconel 6600 slip on flange ranges between 24 to 36 USD per Kg. But this is however completely upon the thickness, diameter, chemical composition and many other mechanical properties that make up this product to be a durable and highly corrosion resistant.

Other factors also depend upon the demands of an end user, availability of the fl1ange, and much more. This will give you a clear picture on your basic needs being fulfilled. You can check out the precise specification and their physical and chemical compositions from and purchase accordingly.

Need any help, we also have experienced suppliers to guide you with the best tips and suggestions that can help you meet your needs and standards. If you want, we can also provide samples so that you can check it out at your end and then purchase accordingly.

Inconel alloy 600 weld neck flanges dimensions
Class 900 300 150 600 2500 1500
H 66.4 52.6 47.6 58.4 79.4 66.4
DIA D 120 95 90 95 135 120
DIA A 38 38 30 38 43 38
DIA G 35.1
NO. L 4
THK B 28.7 14.3 11.2 20.7 36.6 28.7
DIA K 82.6 66.7 60.3 66.7 88.9 82.6
DIA L 22.2 15.9 22.2
Dia Of Stud Bolts x Length
lgth (mm) 110 65 55 75 120 110
DIA (in) 3/4 1/2 3/4
Dimensions of nickel alloy 600 slip on flange
Class 900 300 150 600 2500 1500
DIA A 38 38 30 38 ... 38
DIA D 120 95 90 95 ... 120
THK B 28.7 14.3 11.2 20.7 ... 28.7
DIA G 35.1 ... 35.1
DIA K 82.6 66.7 60.3 66.7 ... 82.6
H 38.4 22.6 15.6 28.4 ... 38.4
NO. L 4 ... 4
DIA L 22.2 15.9 ... 22.2
Dia of Stud Bolts x Length
DIA (in) 3/4 1/2 ... 3/4
lgth (mm) 110 65 55 75 ... 110