Inconel 600 Pipe Fittings

  • Home
  • Inconel 600 Pipe Fittings
inconel 600 pipe fittings
Is it possible to get details from Regent Steel regarding prices, delivery dates, and minimum order sizes?

Regent Steel & Engineering Co. is a reputed supplier in India of high quality inconel 600 products. You can contact us directly to get detailed information about prices, delivery dates, and minimum order sizes.

e offer certified EN 2.4816 fittings at the most competitive rates that are manufactured according to industry standards. The specific price of the fittings would however depend on the size, dimensions, customization, quantity ordered and delivery location.

We have a huge inventory of inconel 600 seamless fittings, hence we deliver the products within the promised timelines. Delivery of standard sized fittings will be faster but customization would also not take too long as we have a fully equipped facility for that.

There is no min order quantity for alloy 600 tee, however, it can vary with each order. There are special discounts and offers on bulk ordering and for long-term customers.

Table of content

We are first Indian company to manufacture inconel 600 buttweld fittings in compliance with ASTM B366, know its various types and sizes

What are the various types and sizes of inconel 600 pipe fittings?

The inconel 600 pipe fittings are available in different shapes and they are employed for varied functions. The common ones are

  • Elbows help to change the flow direction inside the pipe.
  • Tee helps to split or combine fluids in a pipeline.
  • DIN 2.4816 concentric reducer can connect pipes of different diameters.
  • Couplings join two pipes of similar diameter.
  • UNS 6600 pipe cross helps to split fluid flow into multiple directions.

The pipe fittings are also available in different sizes to match the piping diameter and thickness. Even though there are some standard sizes available for ASTM B366 UNS N06600 eccentric reducer, tees and other fittings, they can be customized as per application requirements.

Regent steel is the premier supplier of alloy 600 elbow and tee for chemical industries in Mumbai as per ANSI/ASME B16.9, look its certification and standards

Inconel 600 fittings

Inconel 600 fittings

Alloy 600 buttweld fittings

Alloy 600 buttweld fittings

Inconel alloy 600 elbow

Inconel alloy 600 elbow

Are the inconel 600 fittings certified and up to industrial standards?

Regent Steel & Engineering Co. offers certified inconel 600 fittings that are manufactured as per industrial standards. We never compromise the quality or integrity of our products. We conduct different types of tests which will ensure that the products are free from defects and eligible to meet specific operational requirements.

Get high-quality inconel 600 fittings from 1/2" to 10" (seamless) and 1/2" to 48" (welded) at the most affordable costs, You'll save money by placing your orders online.

Inconel 600 pipe fittings specification
inconel 600 pipe fittings specification

 

Welded Size Seamless Size Standard
1/2" to 120" 1/2" to 24" ASME/ANSI B16.9, ASME B16.28
Inconel 600 fittings Type Schedule Radius
Elbow, tee, reducer, cap stub end Sch 10 to Sch 140 1D to 10D
Surface Specification Inconel 600 fittings process
Sand rolling, Sand blasting ASTM B366 | ASME SB366 Seamless, welded, fabricated
we provide ASME SB366 UNS N06600 reducer and stub ends in any size to accommodate the client's needs ; read more about the available varieties
Most frequently used types of inconel alloy 600 fittings
UNS N06600 tee

UNS N06600 tee

  • ASTM B366 | ASME SB366
  • Seamless: 1/2 to 10 inch
  • Welded: 1/2 to 48 inch
DIN 2.4816 reducer

DIN 2.4816 reducer

  • Thickness : 10 Swg. to 20 Swg.
  • ASME/ANSI B16.9
  • Schedule :Sch 5 TO Sch XXS.
Nickel alloy 600 stub end

Nickel alloy 600 stub end

  • Fabricated
  • Seamless
  • Welded
Is it difficult to find DIN 2.4816 seamless and welded fittings in odd sizes? Do not worry; factory pricing are now reachable through the online ordering. check its properties also
Nickel alloy 600 tee mechanical properties
Element Tensile Strength Melting Point Yield Strength (0.2%Offset) Density Elongation
Inconel 600 Psi – 95,000 , MPa – 655 1413 °C (2580 °F) Psi – 45,000 , MPa – 310 8.47 g/cm3 40 %
DIN 2.4816 reducer chemical properties
Grade Cr S Ni Fe Mn C Si P Cu
Inconel 600 Min %. 14 6
Max%. 17 0.015 72 10 1 0.15 0.5 0.015 0.5
Inconel 600 elbow equivalent
GRADE OLD BRITISH JIS UNS G0ST AFNOR OR
Inconel 600 EN BS NCF 600 N0600 XH60BT NC15FE11M ЭИ868
NiCr15Fe NA 14
Do regent steel provide any further services, such as fabrication or quick shipping?

When you buy inconel 600 seamless fittings from Regent Steel & Engineering Co., you will not have to worry about anything else. We offer additional services like fabrication and worldwide shipping so that your purchase journey remains smooth. We always focus on maximizing the satisfaction of our customers and hence have designed our products and services to give you the best experience.

How long does it take to fabricate and deliver inconel 600 buttweld fittings?

At Regent Steel & Engineering Co., the number of days taken for fabrication and delivery depends on the specific orders. It will vary with the customization required and quantity ordered for inconel 600 buttweld fittings. We will discuss that with you at the time of the delivery and we always strictly adhere to the deadlines. With us, you will not have to worry about delayed projects unless there is an unforeseen circumstance.

What treatments or coatings done on alloy 600 elbow to improve its performance?
  • Passivation is a common surface treatment for inconel alloy 600 elbow. Herein, the chemical process helps to remove the surface contaminants and improve the elbow’s corrosion resistance.
  • Pickling removes oxide scales and rust from the elbow surface with the help of an acid solution.
  • Electropolishing helps to improve the surface appearance.
  • Passive coating can enhance the resistance power of the elbow against certain chemicals or environmental conditions.
Tolerances of ASTM B366 UNS N06600 elbow
OD
at Bevel (D)
+ 2.4
- 1.6
1.6 + 1.6
- 0.8
1.6
NPS 5 to 8 3 to 3.1/2 1/2 to 2.1/2 4
Center to End LR (A/B) 2 2 2 2
ID at End 1.6 0.8 1.6
NPS 32 to 48 20 to 24 10 to 18 26 to 30
Center to End 3D (A/B) 3
Center to End LR (A/B) 5 2 2 3
ID at End + 6.4
- 4.8
4.8 3.2 + 6.4
- 4.8
OD
at Bevel (D)
+ 6.4
- 4.8
+ 4
- 3.2
Center to End 3D (A/B) 6 3 3 6
Wall Thickness (t) Not less than 87.5% of Nominal Wall Thickness
Dimensions of alloy 600 end cap
NPS Length
H
O.D.
D
Length
H(1)
3/4 25 26.7 25
1/2 25 21.3 25
1.1/4 38 42.2 38
1 38 33.4 38
1.1/2 38 48.3 38
2.1/2 38 73 51
2 38 60.3 44
3 51 88.9 64
4 64 114.3 76
3.1/2 64 101.6 76
5 76 141.3 89
8 102 219.1 127
6 89 168.3 102
10 127 273 152
14 165 355.6 191
12 152 323.8 178
48 343 1219 -
18 203 457 229
16 178 406.4 203
20 229 508 254
24 267 610 305
22 254 559 254
26 267 660 -
30 267 762 -
28 267 711 -
32 267 813 -
36 267 914 -
34 237 864 -
38 305 965 -
40 305 1016 -
44 343 1118 -
42 305 1067 -
46 343 1168 -
close