Inconel 600 Pipe

  • Home
  • Inconel 600 pipe
inconel 600 pipe
What is Inconel 600 pipe ?

Inconel 600 is a chromium nickel alloy that is specifically used in a temperature range of cryogenic to 2000 °F. The alloy has a high nickel content and hence is resistant to chloride stress corrosion cracking. The inconel 600 pipe is also used in weaker oxidizing and reducing environments.

The material is known for its excellent material and non-magnetic properties. They are suitable for both cryogenic and elevated temperature applications.

Regent Steel & Engineering Co. offers nickel Alloy 600 erw pipe in customized dimensions and surface finish to meet your requirements. We adhere to the relevant industry standards while manufacturing the pipes to maintain quality and integrity.

advanced facility, large inventory, dedicated professionals and streamlined delivery process ensure that you will get your product on time. We conduct multiple in house and third party inspections of the SCH160 Inconel 600 pipe to confirm their integrity.

Table of content

We are one of India's largest and highest-quality alloy 600 pipe Supplier from recognized mills as per ASTM B167, contact us for price list

What is the cost of alloy 600 pipe in India?

The cost of alloy 600 pipe in India can vary with the suppliers as per their internal pricing strategies and market conditions. Size, dimensions, added customization, quantity ordered and delivery location can also impact the final price.

Looking for reliable alloy 600 pipe suppliers who offer quality pipes at affordable rates? Contact Regent Steel & Engineering Co.

Why spend extra if you can get the exact size in ASME SB167 Inconel 600 seamless pipe here? See difference between Inconel 600 and 316l for further information.

Alloy 600 Pipe

Alloy 600 Pipe

Inconel 600 Seamless Pipe

Inconel 600 Seamless Pipe

UNS N06600 Welded Pipe

UNS N06600 Welded Pipe

What is the difference between Inconel 600 and 316l?
  • Inconel 600 is a nickel based alloy whereas 316L is a low carbon stainless steel. They both have different chemical composition.
  • Inconel 600 pipe suppliers confirms that it shows higher resistance to corrosion than the 316l material.
  • Alloy 600 offers higher elevated temperature resistance properties than 316l.
  • 316l has lower strength than inconel 600.

As stockist we provide UNS N06600 Welded Pipe in size range from 0.125 to 4 inch at a reasonable cost in Mumbai

DIN 2.4816 pipe specification
Inconel 600 pipe specification

 

Size Length Wall Thickness
.125 to 4" OD 6 to 12 meter Sch 10 to Sch 80
Specification Process Use
ASTM B167 | ASME SB167 seamless, welded, hot rolled, annealed aerospace, food industry, nuclear
We are here to help you with any Nickel Alloy 600 annealed pipe requirements to fulfil your project's requirements
Most selling types of Inconel 600 pipe
Nickel Alloy 600 ERW Pipe

Nickel Alloy 600 ERW Pipe

  • Nuclear power generation
  • Aerospace
  • Oil & gas
Inconel 600 Schedule 40 pipe

Inconel 600 Schedule 40 pipe

  • Specification: ASTM B167 | ASME SB167
  • Thickness: Sch10 to Sch80
  • OD: .125 to 4 inch
DIN 2.4816 cold drawn pipe

DIN 2.4816 cold drawn pipe

  • Plain end
  • Threaded end
  • Beveled end
As a leading inconel 600 schedule 40 pipe stockholder, we provide value-added services together with a variety of wall thicknesses, check its equivalent, chemical and mechanical properties
Inconel 600 seamless pipe equivalent
GRADE OLD BRITISH JIS UNS G0ST AFNOR OR
Inconel 600 EN BS NCF 600 N0600 XH60BT NC15FE11M ЭИ868
NiCr15Fe NA 14
Alloy 600 pipe mechanical properties
Element Tensile Strength Melting Point Yield Strength (0.2%Offset) Density Elongation
Inconel 600 Psi – 95,000 , MPa – 655 1413 °C (2580 °F) Psi – 45,000 , MPa – 310 8.47 g/cm3 40 %
UNS N06600 welded pipe chemical properties
Grade Cr S Ni Fe Mn C Si P Cu
Inconel 600 Min %. 14 6
Max%. 17 0.015 72 10 1 0.15 0.5 0.015 0.5
Is UNS N06600 stronger than titanium?

Titanium has a high strength-to-weight ratio, which means it is quite strong with low density. On the other hand, inconel 600 is quite strong at elevated temperatures and has a higher density than titanium. But, in terms of specific strength, titanium is stronger.

The temperature and environment is a deciding factor as performance of Ti is not as high as inconel 600 seamless pipe at extreme temperatures.

Can nickel alloy 600 pipe be welded?

The nickel alloy 600 material has good weldability and hence can be welded. However, to get the desired results from UNS N06600 welded pipe, proper welding techniques and filler material must be employed. During the process, proper welding parameters must be followed to achieve proper weld penetration and reduce the risk of defects.

What is the specialty of inconel 600 Schedule 40 pipe?

The inconel 600 schedule 40 pipe has a specific wall thickness which offers a good balance of strength and flexibility. Higher schedule pipes have thicker walls which offers greater pressure resistance and reduced flexibility. The choice of schedule would depend on your application’s operating conditions like pressure and temperature requirements.

Welding consumables of alloy 600 pipe
FILLERS INCONEL Filler Metal 82 INCOFLUX 4
WELDING ELECTRODES INCONEL 182
Physical properties of inconel 600 welded pipes
Inconel 600 200°F 70°F 400°F 800°F 600°F 1000°F
Thermal Expansion X10-6/°F 7.4 5.8 7.7 8.1 7.9 7.7
Density lbs/in3 - 0.306 - - - -
Poisson Ratio - 0.319 0.327 0.312 0.301 0.307 -
Elastic Modulus 103 ksi 30.5 31.1 29.7 27.8 28.8 25.7
Thermal Conductivity Btu-in/h·ft2 ·°F 109 103 121 145 133 139
Yield Strength ksi 26 35 24 21 23 34
Specific Heat Btu/lb·°F 0.111 0.106 0.116 0.126 0.121 0.118
Tensile Strength ksi 75 80 73 69 70 88
Wall thickness and schedule of nickel alloy 600 erw pipe
O.D. Inches Nominal 80 10 80s & E.H. 40s & Std 10s 40 160
.540 1/4 .119 .065 .119 .088 .065 .088
.405 1/8 .095 .049 .095 .068 .049 .068
.675 3/8 .126 .065 .126 .091 .065 .091
1.050 3/4 .154 .083 .154 .113 .083 .113 .218
.840 1/2 .147 .083 .147 .109 .083 .109 .187
1.315 1 .179 .109 .179 .133 .109 .133 .250
1.900 1 1/2 .200 .109 .200 .145 .109 .145 .281
1.660 1 1/4 .191 .109 .191 .140 .109 .140 .250
2.375 2 .218 .109 .218 .154 .109 .154 .343
3.500 3 .300 .120 .300 .216 .120 .216 .437
2.875 2 1/2 .276 .120 .276 .203 .120 .203 .375
4.000 3 1/2 .318 .120 .318 .226 .120 .226
5.000 4 1/2 .355 .247
4.500 4 .337 .120 .337 .237 .120 .237 .531
5.563 5 .375 .134 .375 .258 .134 .258 .625
7.625 7 .500 .301
6.625 6 .432 .134 .432 .280 .134 .280 .718
8.625 8 .500 .148 .500 .322 .148 .322 .906
18.000 18 .937 .250 .500 .375 .188 .562 1.781
10.750 10 .593 .165 .500 .365 .165 .365 1.125
9.625 9 .500 .342
12.750 12 .687 .180 .500 .375 .180 .406 1.312
14.000 14 .750 .250 .500 .375 .188 .437 1.406
11.750 11 .500 .375
16.000 16 .843 .250 .500 .375 .188 .500 1.593
Pressure rating of DIN 2.4816 cold drawn pipe
OD
(In.)
Wall Thickness (Inches)
.065 .035 .028 .049 .095 .083 .120 .109
  Working Pressure
1/4 9500 4800 3700 7000
1/8 10100 7900
3/8 6100 3100 4400
5/16 7300 3700 5400
3/4 3000 2200 4600 4000
1/2 4400 2300 3200
1 2200 3400 2900 4300 3900
FAQ
Which welding method use for alloy 600 pipes?

MIG, TIG pulse technology

What is the maximum allowable stress for UNS N06600 welded pipes?

75 to 220 ksi

What is the conductivity of inconel 600 schedule 40 pipes ?

14.8 W/m·K - 20.9 W/m·K metric units.

What temperature does DIN 2.4816 pipes oxidize?

700, 800 and 900 °C

What are manufacturing specifications of Nickel alloy 600 annealed pipes?
  • ASTM B167
  • AMS 5580
  • ASTM B163
  • BS 3074
close