Inconel 625 flanges

  • Home
  • Inconel 625 flanges
inconel 625 flange
What is Inconel 625 flanges?

Inheriting the property of corrosion resistance to normal and oxidized situations, Inconel 625 flanges exhibits excellent fatigue strength. It is non-magnetic in nature. Adding to this, they operate across wide range of temperatures from cryogenic to 2000° F. This material is also popular for resisting hot sea water and reduced acids. It also offers excellent fabricability. Nickel 625 plate flange is often a demand for the purpose of construction for resolving large number of problems that one encounters with respect to design and application mode.

Table of content

Find a genuine alloy 625 blind and slip on flange manufacturer in India who adheres to ASTM B564 and discover more types

What are the different kinds of alloy 625 flanges?

There are many types of alloy 625 flanges that you get to see and are demanded by many industries based on requirements.

  • 625 Inconel Square Flanges.
  • Inconel 625 Weld Neck Flanges.
  • Inconel 625 Blind Flanges.
  • Inconel 625 Slip on Flanges.
  • ANSI B16.5 Inconel 625 Socket Weld Flanges.
  • Inconel UNS N06625 Ring Type Joint Flanges.
  • 625 Inconel Threaded Flanges.

These are the main 7 types of flanges that are available. Although there are many types of flanges, but all offer same results, resistance to corrosive environments, be it normal or oxidized environments. Because of the high tensile strength, they can withstand high temperature levels.

As supplier, we are specialise in custom sizes UNS N06625 weld neck and forged flange as per ANSI/ASME B16.5 to meet your specific requirements, read its installation process

Alloy 625 flanges

Alloy 625 flanges

UNS N06625 blind flange

UNS N06625 blind flange

Inconel alloy 625 weld neck flange

Inconel alloy 625 weld neck flange

What is the procedure for installing Inconel 625 flanges?

Proper and secure procedures need to be followed when installing an Inconel 6625 reducing flange.

  • Firstly, it is very important to check the flange of any faults or defects. If found any defects, then it is strongly recommended to not be used. Then, look out for various prerequisite tools that are associated for the installation of a flange. For example, wrenches, sockets and torques.
  • You would also need eye-protection glasses an glove for this purpose. Then prepare the joint, where we would join the two parts using a fastener.
  • Make sure that the parts are aligned and cleaned properly. Insert the flange into the hole. Make sure its properly oriented. With the help of torque, very carefully tighten the fastener. Do not overtighten the fasten, which would result in the reduction of the strength of the flange and it won’t last long.

As a trusted stockist we provide ASME SB564 DIN 2.4856 lap joint and socket weld flange in sizes ranging from ½” to 36″ with all face types in Mumbai at an affordable price. view complete specification

Inconel 625 flanges specification
inconel 625 flanges specification

 

Class Size Pressure
150 to 2500 1/2 to 48 " PN6 to PN64
Inconel 625 flange Standard Face Type Specification
ANSI/ ASME B16.5, B16.47 series A & B FF, RF, RTJ ASTM B564 | ASME SB564
we can provide custom nickel alloy 625 reducing and threaded flange in almost any pressure rating, finish with the highest standards and quality.
Frequently used types of alloy 625 flanges
Nickel alloy 625 slip on flange

Nickel alloy 625 slip on flange

  • ASTM B564 | ASME SB564
  • 1/2″NB TO 60″NB
  • PN6 to PN64
DIN 2.4856 lap joint flange

DIN 2.4856 lap joint flange

  • 600#, 900#
  • 150#, 300#
  • 1500#, 2500#
Inconel 6625 socket weld flange

Inconel 6625 socket weld flange

  • Raised Face (RF)
  • Ring Type Joint (RTJ)
  • Flate Face (FF)
Offering the most competitive price for inconel alloy 625 plate flange with Mill TC, evaluate their chemical, mechanical compatibility, equivalent
Nickel alloy 625 slip on flange mechanical properties
Inconel 625 flange Tensile Strength Hardness Reduction of area 0.2% Proof Stress Elongation
MPA HRB % MPA %
Min Min Min Min Min
827 145 40 414 30
DIN 2.4856 weld neck flange chemical properties
Inconel 625 flange Ni Mn Cr Mo Ti Nb+Ta Fe C Si Ph S Co Al
Max 0.10 - 5 0.40 10 23 4.15 0.50 0.50 0.015 0.40 0.015 1.0
Min - Bal - - 8 20 3.15 - - - - - -
ASTM B564 UNS N06625 flange equivalent
STANDARD GOST JIS WERKSTOFF NR. BS UNS AFNOR EN
Inconel 625 ХН75МБТЮ NCF 625 2.4856 NA 21 N06625 NC22DNB4MNiCr22Mo9Nb NiCr23Fe
is UNS N06625 flange suitable for marine engineering?

UNS N06625 socket weld flange is a well-known flange because of its excellent corrosion resistance. It also shows this property in situations of seawater corrosions. Hence, this material is not only available and demanded by industries such as Chemical industries, Aeronautics, Power generators, Oil and gas, and medicals, but also it is very much in demand in marine engineering. These types of industries face seawater corrosion-based situations, hence such a material is a solution to prevent corrosion and last for longer durations. This enhances durability and longevity.

What distinguishes Inconel 625 from Inconel 718?

Numerous differences emerge from Inconel 625 and Inconel 718, when these two materials are brought into picture for their comparison.

  • Although both have Nickel as their component alloy, but their chemical compositions differ. Inconel 625 forged flange is a Nickel based alloy, whereas on the other hand, Inconel 718 is a nickel and cobalt based alloy.
  • Presence of combination of Nickel and Cobalt proves that it has higher strength and are harder than ASME SB564 DIN 2.4856 lap joint flange. On the other hand, presence of higher contents of Nickel and Molybdenum makes it more corrosive resistive.
What is the maximum temperature for inconel alloy 625 blind flanges?

Inconel alloy 625 blind flange not only provide corrosion resistive environments, but also works excellent when exposed to temperatures ranging between cryogenic to 2000 ° F. But very important to note that the furnishing of this material should only be done in annealing conditions. It is severe to loss of impact strength at room temperatures, after exposure in the range of 500-800 ° C. It should not exceed 650 ° C.

Dimensions of alloy 625 blind flange
Pipe Size - Inconel 625 Pipe Flanges Inconel 625 Flange Connection Type Max. Pressure Inconel 625 Flange Schedule/Class
1/2" FNPT 150 psi ASME B16.5 Class 150
1/2" Socket Weld 275 psi ASME B16.5 Class 150
2-1/2" Slip On 720 psi ASME B16.5 Class 300
3/4" FNPT 150 psi ASME B16.5 Class 150
4" Slip On 720 psi ASME B16.5 Class 300
1/2" Welded 150 psi ASME B16.5 Class 150
3/4" Socket Weld 275 psi ASME B16.5 Class 150
3" Slip On 720 psi ASME B16.5 Class 300
3" Slip On 720 psi ASME B16.5 Class 300
4" Slip On 720 psi ASME B16.5 Class 300
1-1/4" Socket Weld 275 psi ASME B16.5 Class 150
1-1/2" Socket Weld 275 psi ASME B16.5 Class 150
2" FNPT 150 psi ASME B16.5 Class 150
2-1/2" Socket Weld 275 psi ASME B16.5 Class 150
1" Slip On 720 psi ASME B16.5 Class 300
1-1/2" Slip On 720 psi ASME B16.5 Class 300
1/2" Slip On 720 psi ASME B16.5 Class 300
2" Socket Weld 275 psi ASME B16.5 Class 150
2-1/2" Slip On 720 psi ASME B16.5 Class 300
3" Socket Weld 275 psi ASME B16.5 Class 150
4" FNPT 150 psi ASME B16.5 Class 150
4" Socket Weld 275 psi ASME B16.5 Class 150
2" Slip On 720 psi ASME B16.5 Class 300
1/2" Slip On 720 psi ASME B16.5 Class 300
1-1/4" FNPT 720 psi ASME B16.5 Class 300
1" Slip On 720 psi ASME B16.5 Class 300
1-1/4" Slip On 720 psi ASME B16.5 Class 300
1-1/2" Slip On 720 psi ASME B16.5 Class 300
2" Slip On 720 psi ASME B16.5 Class 300
Face type of UNS N06625 socket weld flange
Type Face Type of Inconel 625 Flanges
B Raised Face
A Flat Face
C Tongue Face
E Spigot
D Grooved Face
G Ring Recess
F Recess
H O-Ring Groove
close