Monel 400® Butt weld Pipe Fittings - UNS N04400 / DIN 2.4360

DIN 2.4360 Monel Alloy 400® Butt weld Fitting Manufacturers, Monel 400® Butt weld Reducers Exporters, Alloy 400 Fitting 90 Deg Elbow, Alloy 400 Pipe End Cap Worldwide Distributors, N04400 Monel 400 Pipe Fitting Suppliers in India.


Monel 400 Butt weld Pipe Fittings

ANSI/ASME B16.28 Nickelvac 400® 45 Deg Elbow Exporters, Monel Nicorros® 400 Eccentric Reducer, N04400 Monel Alloy 400® Concentric Reducer Dealers, Alloy 400 Short Stub End, Alloy 400 Butt weld Stub End Stockholders in India.

Regent Steel & Engg. Co. provide best quality Monel Alloy 400 Butt weld Pipe Fittings like 400 Monel Seamless Pipe Fittings, Monel 400 Alloy Welded Pipe Fittings at reasonable prices, high on quality and durability. We have an expert working team who fabricated this monel 400 seamless fitting and monel alloy 400 welded fitting of monel in terms of good quality & reliability.

These Monel Butt Weld Fitting Available Types of reducing elbow, equal tee, unequal tee, long radius elbow 45 deg, long subtend, short subtend, long radius and short radius elbow 180 deg (return bend), crosses, concentric reducer, eccentric reducer, Long radius and short radius elbow 90 deg, collar, pipe cap, long radius bends, etc.

We supply and export of good quality of monel 400 butt weld fitting. These Monel 400 Pipe Fittings mostly used in Structure Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe, Gas Pipe, Pneumatic Connections, etc.


Monel Alloy 400® Butt weld Pipe Fittings Specification:

Material Grade: Monel Alloy 400® / UNS N04400 / WNR 2.4360

Specifications: ASTM B366 / ASME SB366

Type: Welded / Seamless / Fabricated

Welded Butt weld Fitting Size: 1/2″ – 48″

Seamless Butt weld Fitting Size: 1/2″ – 10″

Dimension: ANSI/ASME B16.28, ASME B16.9, MSS-SP-43

Thickness: 5s, 10, 20, 40, 10s, 40s, 60, 80, XS, 80s, STD, 100, 120, 140, 160, XXS available with NACE MR 01-75

Form: Equal Cross, Unequal Cross, 1D Elbow, 90 Deg Elbow, 3D Elbow, Elbow, Unequal Tee, 5D Elbow, 45 Deg Elbow, 180 Deg Elbows, Barrel Nipple, Swage Nipple, Long Radius Bends, Long Radius Elbow, Short Radius Elbow, Reducer, Reducing Tee, Reducing Nipple, End Cap/Pipe Cap, Stubend, Long & Short Stubend, Tee, Equal Tee, Piggable Bend, Concentric and Eccentric Reducer, Bend.


ASME B16.9 Monel 400 Fitting Bend Suppliers, 400® Alloy Equal Cross Stockists, WNR 2.4360 Alloy 400 Monel Equal Tee Manufacturers, Monel 400® Long Stub End, ASTM B366 Monel 400 Lateral Tee Dealers in India.

Standard Monel 400
AFNOR NU-30M
GOST МНЖМц 28-2,5-1,5
UNS N04400
Werkstoff Nr. 2.4360
BS NA 13
EN NiCu30Fe
JIS NW 4400

N04400 Monel 400® Seamless Fitting, Monel 400 Butt weld Fittings, Alloy 400 Welded Fitting Chemical Composition

Monel 400 Si C Mn Fe Cu Al Ni S
0.5 max 0.3 max 2.0 max 1.0 – 2.5 28.0 – 34.0 0.50 max 63.0 min 0.02 max

N04400 Monel 400 Equal Cross, Monel 400® Reducing Tee, Alloy 400 Equal Tee Mechanical & Physical Properties

Yield Strength (0.2%Offset) Density Elongation Melting Point Tensile Strength
Psi - 35,000, MPa - 240 8.8 g/cm3 40 % 1350 °C (2460 °F) Psi – 80,000, MPa – 550
Monel 400® Pipe Fitting Monel 400 Butt weld Fitting 400 Alloy Butt weld Pipe Fittings
Alloy 400 Pipe End Cap 400® Monel Lateral Tee 400 Alloy Eccentric Reducer
400® Monel 180 Deg Elbows DIN 2.4360 Alloy Reducing Nipple Monel 400® Stubend
Monel Alloy 400 Butt wel Elbow N04400 Alloy Fitting Cross Monel 400® Seamless Fitting
UNS N04400 Alloy 400® Concentric Reducer Monel 400® 90 Deg Seamless Elbow Monel Alloy 400 45 Deg Welded Elbow
N04400 Alloy Welded Fittings Monel 400 Buttweld Cross Monel 400® Long Stub End
Monel 400 Short Stub End Alloy 400® Equal Tee UNS N04400 Reducing Tee

Types of Products

Steel Sheets, Plates & Coils

Sheets, Plates & Coils

Chequered Plate, Shim Sheets, Polished Sheets, Plain Sheet, Perforated Sheet, etc.
Steel Round Bars & Rods

Round Bars & Rods

Hex Bars, Forged Bars, Threaded Bars, Flat Bars, Polished Bars, etc.
Steel Pipes & Tubes

Pipes & Tubes

Seamless, Welded, ERW, EFW, Polished, Fabricated Pipes & Tubes, etc.
Steel Butt weld Pipe Fittings

Butt weld Pipe Fittings

Elbow, Tee, Reducers, Cross, Stub End, Pipe End Cap, Seamless & Welded Fittings.
Steel Flanges

Flanges

Slip on Flanges, Blind Flange, Lap Joint Flanges, Threaded Flange, Socket weld Flanges.
Steel Fasteners

Fasteners

Nuts, Bolts, Washers, Screws, Studs Bolts, Machine Screw, Plain Washer, etc.
Steel Forged Fittings

Forged Fittings

Elbow, Tees, Cross, Nipple, Threaded & Socket weld Fittings, etc.
Custom Forging

Custom Forging

Ring Rolling Forging, Special Type Forgings, Open Die Forging, Upset Forging.