Nickel 200 pipe fittings

  • Home
  • Nickel 200 pipe fittings
Nickel 200 pipe fittings
What are uses and advantages of nickel 200 pipe fittings?

Purely wrought out of 99.6% Nickel, nickel 200 pipe fittings offers advantages and uses on a large scale. Advantages:

  • They have increased mechanical properties, because these pipe fittings comprise low carbon content.
  • Excellent corrosion resistance to corrosive environments is provided by 200 Nickel pipe fittings.
  • It also has high thermal and electrical conductivity.

Along with these advantages, following are its ideal use cases:

  • Chemical equipment.
  • Gas processing.
  • Heat exchangers.
  • Pharmaceuticals.
  • Power generation.
Table of content

We are one of India's largest and best-quality nickel alloy 200 elbow manufacturer, review requirements and terms of payment

What are the requirements and terms of payment for an alloy 200 elbow?

Nickel alloy 200 elbow is required by wide range of the industries where we want to end or divide the fluid flow. Requirement: The main requirement lies under the fact that it must meet standard:

  • UNS N02201,
  • BS NA11,
  • WERKSTOFF 2.4066,
  • EN Ni 99.2,
  • ANOR N-100M and,
  • JIS NW 2200.

Based on the payment terminologies:

  • You can purchase from our website at a reasonable rate. You can perform transaction by using cheque, cash on delivery, payment portals (such as PayPal) or net banking.
  • If you are purchasing the product from India, check how much GST has been applied and then purchase the elbow.
  • If it involves coating the material, you need to pay additional charges and if the ordered elbow is of custom size, then you can pay extra amount for the same.

We at regentsteel.com, provide customer with the best quotations. Do not worry about the quantity in need: whether small amounts or bulk, we would provide you this elbow that would meet your standards. We also provide samples so that you can use it and then take decision for purchasing it later.

Why spend more when ASTM B366 UNS N02200 tee and reducer is available here in the precise size? know What should I do if the I receive faulted product ?

Nickel alloy 200 elbow

Nickel alloy 200 elbow

Alloy 200 tee

Alloy 200 tee

UNS n02200 reducer

UNS n02200 reducer

What should I do if the nickel 200 fittings I receive have any problems or faults?

Often while packaging, or while transporting ASME SB366 nickel 200 fittings, we might face problems regarding faults in the fittings. In such situations, immediately ask for the replacement from the supplier by reporting the exact issue to them.

Before this, It is very important to thoroughly inspect the material at your end once it is delivered and then report the issues to the supplier. Even when your product is delivered safe and sound, it is important to follow the above steps. We also provide sample products if the order is very large, so that people can use and test it in order to have a clear idea about the product.

As supplier and stockist we offer nickel 200 buttweld fittings in sizes ranging from 1/2′′ to 10′′ (seamless) and 1/2′′ to 48′′ (welded) at a competitive price in Mumbai for chemical equipment , see specification chart

Nickel 200 pipe fittings specification
nickel 200 pipe fittings specification

 

Welded Seamless Standard
1/2" to 48" 1/2" to 10" ASME/ANSI B16.9, ASME B16.28
Nickel 200 Fittings Type Schedule Thickness
Elbow, tee, reducer, cap stub end Sch 5 to Sch XXS 2 to 40 mm
Radius Nickel 200 Fittings Type Specification Process
1D to 10D or custom ASTM B366 | ASME SB366 Seamless, welded, fabricated
If you need any assistance with DIN 2.4066 stub end, pipe bend, cross and caps requirements to complete your project, please contact us, check nickel 200 fittings other types
Most selling types of nickel alloy 200 fittings
Ni200 stub end

Ni200 stub end

  • Welded: 1/2 to 48 inch
  • Seamless : 1/2 to 10 inch
  • Sch 5 to Sch XXS.
DIN 2.4066 pipe bend

DIN 2.4066 pipe bend

  • Welded
  • Seamless
  • Fabricated
Pure nickel 200 pipe cross

Pure nickel 200 pipe cross

  • ASTM B366 | ASME SB366
  • ASME B16.28
  • ASME/ANSI B16.9
we provide ASME SB366 Ni200 seamless and welded fittings with value-added services together, learn more about pure nickel 200 fittings technical properties
UNS N02200 elbow chemical properties
Grade Nickel 200
Fe 0.40 max
Mn 0.35 max
C 0.15 max
Ni 99.0 min
Cu 0.25 max
Si 0.35 max
S 0.01 max
Nickel 200 tee mechanical properties
Grade Nickel 200
Elongation 45 %
Density 8.9 g/cm3
Tensile Strength Psi – 21,500 , MPa – 148
Melting Point 1446 °C (2635°F)
Yield Strength (0.2%Offset) Psi – 67,000 , MPa – 462
DIN 2.4066 reducer equivalent
STANDARD Nickel 200
EN Ni 99.2
AFNOR N-100M
WERKSTOFF NR. 2.4066
BS NA 11
UNS N02200
GOST НП-2
JIS NW 2200
Before buying a UNS N02200 tee, may I get samples or product testing?

If you want to get a clear picture about nickel N02200 equal tee, you can place an inquiry by sending a request report which is known as Material Test Report or MTR, which mainly comprises the data of product specifications and quality.

Also, MTR plays a key role which will give you a broader picture on the manufacturing and unique features offered, and then you can purchase the alloy 200 tee accordingly. Hence in this way, we assure you quality service after you purchase this product from regentsteel.com

What are experts advise for purchasing Ni200 reducer and stub end?

Before you purchase ASTM B366 UNS N02200 concentric reducer and stub end, it is very important that we consider what is your need and why you choose this material. Other than this, below are some considerable suggestions:

  • Before you buy alloy 200 reducing tee, it is important to check whether the product delivers the properties that it inherits. In this case, check if the material inherits genuine Nickel composition.
  • Without hesitation, ask for necessary legal documents and certification which promise authenticity and quality of DIN 2.4066 stub end.
  • Ensure that the reducer or the stub end contains detailed and precise information such as size, wall thickness and much more. This plays a vital role to understand whether this meets your need or not.
  • Before purchasing the product, make sure that the product is thoroughly tested and is perfectly new. It should not be the case that it turns out to be a renewed product.
Is a hydro test on nickel alloy 200 fittings required before installation?

A mandatory test which is conducted before installing Ni 200 seamless fittings is known by hydro test. This test checks out for the product integrity and whether the product has any damage or faults.

These types of tests are very critical as the result of hydro test would decide the performance of this material. Hence make sure that whenever you purchase this fitting, you get your product tested by using hydro test.

Alloy 200 reducer dimensions
NPS Nickel 200 Reducer O.D.
D1
O.D.
D
Nickel 200 Reducer Length
H
1 - 1/2 21.3 33.4 51
3/4 - 1/2 21.3 26.7 38
1 - 3/4 26.7 33.4 51
1.1/4 - 3/4 26.7 42.2 51
1.1/4 - 1/2 21.3 42.2 51
1.1/4 - 1 33.4 42.2 51
1.1/2 - 3/4 26.7 48.3 64
1.1/2 - 1/2 21.3 48.3 64
1.1/2 - 1.1/4 42.2 48.3 64
1.1/2 - 1 33.4 48.3 64
2 - 3/4 26.7 60.3 76
2 - 1.1/4 42.2 60.3 76
2 - 1 33.4 60.3 76
2 - 1.1/2 48.3 60.3 76
2.1/2 - 1.1/4 42.2 73 89
2.1/2 - 1 33.4 73 89
2.1/2 - 1.1/2 48.3 73 89
3 - 1.1/4 42.2 88.9 89
2.1/2 - 2 60.3 73 89
3 - 1.1/2 48.3 88.9 89
3 - 2.1/2 73 88.9 89
3 - 2 60.3 88.9 89
3.1/2 - 1.1/2 48.3 101.6 102
3.1/2 - 1.1/4 42.2 101.6 102
3.1/2 - 2 60.3 101.6 102
3.1/2 - 3 88.9 101.6 102
3.1/2 - 2.1/2 73 101.6 102
4 - 1.1/2 48.3 114.3 102
4 - 2.1/2 73 114.3 102
4 - 2 60.3 114.3 102
4 - 3 88.9 114.3 102
5 - 2 60.3 141.3 127
4 - 3.1/2 101.6 114.3 102
5 - 3 88.9 141.3 127
5 - 2.1/2 73 141.3 127
5 - 3.1/2 101.6 141.3 127
10 - 6 168.3 273 178
6 - 2.1/2 73 168.3 140
5 - 4 114.3 141.3 127
6 - 3 88.9 168.3 140
6 - 4 114.3 168.3 140
6 - 3.1/2 101.6 168.3 140
6 - 5 141.3 168.3 140
8 - 4 114.3 219.1 152
8 - 3.1/2 101.6 219.1 152
8 - 5 141.3 219.1 152
10 - 4 114.3 273 178
8 - 6 168.3 219.1 152
10 - 5 141.3 273 178
Size chart of Ni 200 straight tees
Nickel 200 Straight Tees O.D.
D
NPS Center to End
M
Center to End
C
26.7 3/4 29 29
21.3 1/2 25 25
42.2 1.1/4 48 48
33.4 1 38 38
48.3 1.1/2 57 57
73 2.1/2 76 76
60.3 2 64 64
101.6 3.1/2 95 95
88.9 3 86 86
114.3 4 105 105
168.3 6 143 143
141.3 5 124 124
219.1 8 178 178
323.8 12 254 254
273 10 216 216
406.4 16 305 305
355.6 14 279 279
508 20 381 381
457 18 343 343
559 22 419 419
660 26 495 495
711 28 521 521
610 24 432 432
762 30 559 559
864 34 635 635
914 36 673 673
813 32 597 597
965 38 711 711
1067 42 711 762
1016 40 749 749
1168 46 800 851
1118 44 762 813
1219 48 838 889
close