| Material René 125 High Lights |
| Hall flow rate |
≤18s/50g
|
| Material Group |
S - Superalloys (Heat resistant and Titanium) |
| Sub-Group |
Superalloy |
| Tensile Strength |
[N/mm^2] |
| Machinability Range |
15% - 45% |
| Particle Size Distribution |
0-25, 15-45, 15-53, 45-105, 45-150um or sieved as required |
| Shape |
Spherical |
| Process |
Gas atomized (GA) or Plasma rotating electrode powder (PREP) |
| Bulk Density |
4.5g/cm3 |
|
Get Rene 125 Alloy as per Standards Click Here
|
Table of Content
Rene 125 Nickel-based Superalloy Supplier in India For Gas Turbine Engines
125 Nickel-based Superalloy Applications
Equivalent International Designations for Material René 125
| Standards |
Name |
| ANFOR |
NK10C8W7ATaTD |
| GB |
K19H |
| GOST |
ЖС6Ф |
| BS EN/BS |
NimocastPD16 |
Recommended Rene 125 Powder
| 3D Printing Technology |
Recommended Rene 125 Powder |
| Binder Jetting |
Irregular or spherical powder (30-80µm) |
| Electron Beam Melting (EBM) |
Gas-atomized powder (45-105µm) |
| Direct Energy Deposition (DED) |
Gas-atomized powder (50-150µm) |
| Laser Powder Bed Fusion (LPBF) |
Gas-atomized spherical powder (15-45µm) |
Key Properties of Rene 125 Alloy
- Superior high-temperature strength
- Outstanding oxidation and corrosion resistance
- Excellent creep resistance
- High weldability and printability
- Optimized for powder-based manufacturing technologies
Buy Material René 125 With Service Temperature Below 1050 °C, Refer Chemical Composition
Material René 125 Chemical Composition
| Element |
Amount |
| Chromium (Cr) |
8.9% |
| Cobalt (Co) |
10% |
| Aluminum (Al) |
4.7% |
| Carbon (C) |
0.1% |
| Tungsten (W) |
7% |
| Molybdenum (Mo) |
2% |
| Titanium (Ti) |
2.5% |
| Nickel (Ni) |
60% |
Rene 125 Alloy Temperature Range
| Maximum Service temperature |
1050 °C |
| Oxidation/creep capable temperature |
Up to ~ 980 °C |
How to Choose the Right Rene 125 Powder?
| Particle Size Distribution (PSD) |
- Fine powders (15-45µm)
- Medium powders (45-105µm)
- Coarse powders (50-150µm)
|
| Powder Morphology |
- Spherical Powder
- Irregular Powder
|
| Atomization Process |
- Gas-Atomized Powder
- Water-Atomized Powder
|
Cutting Speeds for Heat Resistant Ni or Co Based Rene 125 Alloy
| Application |
Vc (SFM) |
Vc (m/min) |
| Parting |
130-380 |
40-115 |
| Grooving |
180-520 |
55-160 |
| Drilling |
180-520 |
55-160 |
| Turning |
200-590 |
60-180 |
| Milling |
150-440 |
45-135 |
Get Rene 125 Powder With Good Medium and High Temperature Comprehensive Properties
Recommended Insert Cutting Edge Geometry for Material René 125
| Honing Size |
0.02-0.05 mm / 0.001-0.002" |
| Land Angle |
Neutral |
| Land Width |
0.10-0.20 mm / 0.004-0.008" |
| Rake Angle |
13° -18° |
| Ground Insert |
Recommended |
Available Sizes and Forms of Rene 125 Powder
| Form |
Available Sizes |
| Powder |
15 to 45 microns |
| Bars/Rods |
0.5 inches to 5 inches |
| Sheets/Plates |
1 mm to 50 mm |
Offer Rene 125 Alloy in Various Forms With Density 8.59 g/cm3, Check Physical and Equivalent
Rene 125 Nickel-based Superalloy Physical Properties
| Property |
Value |
| Density |
8.69 g/cm³ |
| Melting Range |
1260°C - 1343°C (2300°F - 2450°F) |
| Creep Resistance |
Up to 980°C (1800°F) |
| Thermal Conductivity |
11.5 W/m·K |
| Oxidation Resistance |
Effective up to 1050°C (1922°F) |
Standards for Rene 125 Powder
| Standards |
| UNS Number |
N12500 |
| AMS Standards |
AMS 5391 |
| ASTM Standards |
ASTM B637 |
| ISO Standards |
ISO 15156 |
Rene 125 Material Production Methods
- Gas Atomization
- Water Atomization
- Plasma Rotating Electrode Process (PREP)
Find Creep Resistance Rene 125 With 15 to 45% Machinability, See Mechanical Properties
Rene 125 Mechanical Properties
| Property |
Value |
| Ultimate Tensile Strength |
120 ksi (827 MPa) |
| Yield Strength |
85 ksi (586 MPa) |
| Elongation at Break |
10-15% |
| Hardness |
Typically 280-320 HB (Brinell Hardness) |
Specific Models of Rene125 Powder
- Rene125-A1 Powder
- Rene125-B2 Powder
- Rene125-C3 Powder
- Rene125-D4 Powder
- Rene125-E5 Powder
- Rene125-F6 Powder
- Rene125-G7 Powder
- Rene125-H8 Powder
- Rene125-J9 Powder
- Rene125-K10 Powder
Recommended Carbide Grades for Material René 125
| Grade for Turning |
Grade for Milling |
Grade for Parting Off |
Grade for Grooving |
| RS15T |
FM125 |
FM2543 |
FM2533 |
| KM15 |
IC830 (IC928) |
IC807 (IC907) |
IC830 (IC328) |
| TN15 |
KC510M |
IC808 (IC908) |
KCU10 |
| TS20 |
KC522M |
IC830 (IC328) |
KCU25 |
| ZR10 |
KCSM40 |
CP500 |
WSM13S |
| IC806 (IC804) |
F40M |
AH725 |
WSM23S |
| IC807 (IC907) |
MS2500 |
KCU10 |
WSM33S (WSM33) |
| RS25T |
TS20 |
FM2553 |
KM15 |
| RS35T |
S30T |
KM15 |
GC1125 |
| FM524 |
S40T |
GC1105 |
IC806 (IC804) |
| FM2533 |
IC808 (IC908) |
GC1145 |
IC808 (IC908) |
| TS2000 (CP200) |
AH120 |
WSM33S (WSM33) |
CP500 |
| CP500 |
AH725 |
WSM13S |
CP600 |
| TS2500 |
MP9120 |
WSM23S |
AH905 |
| CP600 |
MP9130 |
WSM43S |
AH725 |
| IC830 (IC328) |
MS2050 |
KCU25 |
WSM43S |
| KCU10 (KC5010) |
ACU2500 |
AC520U |
AH7025 |
| KCU25 (KC5025) |
ACM200 |
AC1030U (AC530U) |
VP10RT |
| S05F |
ACM300 |
AH7025 |
VP20RT |
| GC1105 |
RS20M |
AH725 |
VP30RT |
| GC1115 |
RS30M |
VP10RT |
AC520U |
| GC1125 |
RS40M |
VP20RT |
AC1030U (AC530U) |
| AH8005 |
PR1210 |
VP30RT |
- |
| AH8015 |
PR1535 |
- |
- |
| WSM10S (WSM10) |
PR1535 |
- |
- |
| WSM01 |
JS1025(JP4120) |
- |
- |
| WSM20S (WSM20) |
PTH30H |
- |
- |
| WSM30S (WSM30) |
JM4160 |
- |
- |
| MP9005 |
M6330 |
- |
- |
| MP9015 |
8215 |
- |
- |
| VP20RT |
M8340 |
- |
- |
| AC5005S (AC510U) |
M8345(M8346) |
- |
- |
| AC5015S |
WSM35S |
- |
- |
| AC5025S (AC520U) |
WSM45S |
- |
- |
| PR005S(PR1310) |
PC5300 |
- |
- |
| PR015S |
PC8110 |
- |
- |
| PR1125 |
PC5400 |
- |
- |
| PR1325 |
PC3545 |
- |
- |
| PR1535 |
YBG102 |
- |
- |
| JP9115 |
YBG202 |
- |
- |
| T6310(T8310) |
YBG205 |
- |
- |
| T8330 |
- |
- |
- |
| T8345 |
- |
- |
- |
| PC8105 |
- |
- |
- |
| PC8110 |
- |
- |
- |
| PC8115 |
- |
- |
- |
| PC5300 |
- |
- |
- |
| PC9030(PC9070T) |
- |
- |
- |
| PC3030T(PC5400) |
- |
- |
- |
| YBG102(YBG105) |
- |
- |
- |
| YBG202 |
- |
- |
- |
| YBG205 |
- |
- |
- |
| YB9320 |
- |
- |
- |
| YBG302 |
- |
- |
- |
