Super duplex pipe

  • Home
  • Super duplex pipe
Super duplex pipe
What is Super duplex pipe ?

Super duplex material comes with additional strength benefits along with the features of standard duplex ss. The dual phase microstructure makes it stronger and enhances its corrosion resistance. The super duplex pipe has a higher nickel content and thus, it is quite expensive.

The material can resist acids, chloride and caustic solutions. They offer better resistance to stress corrosion cracking and mechanical resistance than other standard ss or duplex alloys.

The super duplex steel pipe shows good mechanical properties like tensile strength of 795 MPa and yield strength of 550 MPa. It can be manufactured using different processes like cold pilgering, extrusion, tube mill and piercing. This should be followed by a heat treatment and mechanical testing.

The super duplex pipe suppliers recommend forging within 1100-1250 °C. This is followed by a reheat process and then the material is cooled down in still air.

Table of content

Regent steel is best super duplex stainless steel pipe supplier in India at a fair price, view SDSS tube critical crevice temperature range

What is the critical crevice temperature of super duplex stainless steel pipe

The critical crevice temperature indicates the point at which crevice corrosion can become a significant concern. For super duplex stainless steel pipe, the CCT is within -50°C to 70°C. However, the exact temperature depends on the duplex grade, heat treatment executed and specific environment.

You can contact your supplier to know about the exact CCT and ensure if it would be a concern for your given application.

Select super duplex seamless pipe from our online inventory ranging from 0.3 to 12.7 mm in wall thickness and 6 to 12 meter in length, must check is SDSS tubing heat treatable ?

Super duplex welded pipe

Super duplex welded pipe

Super duplex tubing

Super duplex tubing

Super duplex stainless steel pipe

Super duplex stainless steel pipe

Is super duplex seamless pipe heat treatable?

Heat treatment of the super duplex seamless pipe is generally limited to solution annealing. It helps to restore the microstructure and properties of the material after hot forming. The process helps to dissolve and homogenize any precipitated phases along with improving its mechanical properties, toughness and corrosion resistance.

Typically super duplex is heated at 1050-1100 °C, and then they are rapidly quenched in various suitable mediums.

If you're seeking for stockist of super duplex welded pipe in size range from 4 mm to 219 mm OD, you've come to the right place, see SDSS tube other specification

Super duplex pipe specification
Size Length Wall Thikness
OD: 4 to 219 mm 6 to 12 meter 0.3 to 12.7 mm
Specification Grades Application
ASTM A790/ A789 Super Duplex 2507 (UNS S32760/S32750 ) Cargo tanks, Shafts, Rotors
Purchase super duplex seamless tube in various types including annealed, redrawn, heat exchanger etc with sample preservation at 100% here
Most popular types of SDSS pipe
Super duplex seamless tube

Super duplex seamless tube

  • Hollow
  • Round
  • Hydraulic
SDSS pipe

SDSS pipe

  • 1/2 to 12 inch NB
  • SCH20 to SCH120
  • ASTM A790 | ASME SA790
Super duplex seamless pipe

Super duplex seamless pipe

  • Plain
  • Bevel
  • Threaded
Get online availability of super duplex steel pipe conforming to ASTM A790/ A789 in all international standards, see here chemical, mechanical properties and equivalent grades
Super duplex steel pipe chemical properties
Others N C Cr Mo Ni
S=0.001 0.27 0.020 25 4.0 7
SDSS tubing mechanical properties
Ultimate Tensile Strength, ksi 116 min.
Hardness Rockwell C 32 max.
0.1% Offset Yield Strength 0.2%, ksi 91 min.
Elongation in 2 inches, % 15 min.
0.2% Offset Yield Strength 0.2%, ksi 80 min.
Impact Energy, ft.-lbs. 74 min.
Super duplex welded pipe equivalent
MATERIAL UNS WERKSTOFF NR.
Super Duplex  S32760/S32750  1.4410
Can you harden super duplex tube?

The super duplex tube cannot be hardened by heat treatment, but they can be work hardened.

What is super duplex tubing used for?

The super duplex tubing is particularly suitable for heat exchangers and tubes & pipes for processing oil & gas. It can also be used for chloride containing processes and chemical tankers.

They are widely used in marine environments along with paper & pulp manufacturing. Super duplex materials are also used for manufacturing structural and mechanical components.

How thick is super duplex steel welded tube?

The common wall thickness of super duplex steel welded tube can range within 0.33 to 20 mm. However, depending on the applications where they will be used, clients can customize the thickness of the tubes.

If the welded SDSS heat exchanger tubes are used in high pressure or extremely corrosive environments, then a thickness of more than 20 mm might be required. You can contact experienced professionals at Regent Steel & Engineering Co. to get an idea about this.

close