Super duplex round bar

  • Home
  • Super duplex round bar
Super duplex round bar
What is super duplex round bar?

Super duplex stainless steel has a dual ferritic and austenitic structure that has iron, chromium, nickel and molybdenum in the alloy. The super duplex round bar possesses high tensile strength and resistance to pitting and stress corrosion at moderate temperatures. The material can be hard worked between 1875 and 2250 °F and then solution annealed at min 1925 °F. This is followed by air cooling or rapid water quenching to get round shaped ASTM A276 super duplex cold drawn bar.

The super duplex SS rounds are used for heat exchangers, and pressure vessels in different industries like oil & gas, chemical processing, etc. The super duplex material shows a great combination of high tensile and impact strengths. Their low coefficient of thermal expansion and high thermal conductivity make them ideal for mechanical and structural applications. Super duplex is magnetic and they do not require preheating unless condensation on cold metal is to be prevented.

Table of content

Genuine super duplex rod and flat bar suppliers in India who adhere to ASTM A276, see where it is used ?

Where super duplex bar is frequently used ?

The super duplex bar is used in applications where high strength, corrosion resistance and durability are required. They offer better physical and mechanical properties than standard austenitic steel and hence can be used for high temperature and pressure service. The super duplex bright bars are found in heat exchangers, condensers and pressure vessels of industries like oil & gas, desalination plants, pulp & paper, water treatment, etc. Super duplex can also resist chloride ion related stress corrosion cracking and hence used in the marine and shipbuilding industries.

Unable to easily obtain super duplex steel square and hex bar in unusual sizes in Mumbai ? check out our online inventory and contact for price list

Super duplex rod

Super duplex rod

Super duplex steel flat bar

Super duplex steel flat bar

Super duplex stainless steel square bar

Super duplex stainless steel square bar

How much does super duplex rod cost? is it expensive? why ?

The super duplex rod cost can vary from one supplier to the other based on their internal costing and market conditions. The price may also change with size & dimensions, customization like surface treatments, quantity ordered, additional requirements like testings and delivery location. You should always contact reputed super duplex product suppliers like Regent Steel & Engineering Co. to get the rods at competitive prices.

Generally, a super duplex material is more expensive than standard stainless steel grades. This is due to its alloy composition which has increased chromium, molybdenum and other pricey element content. Their manufacturing process, corrosion resistance & other mechanical properties and limited availability also increase the price.

As a stockist, we provide a huge selection of ASME SA276 super duplex bar in diameter ranging from 6.35 mm – 355.6 mm, as well as custom orders at actual costs, see detail specification

Super duplex round bar specification
Super duplex round bar specification

 

Diameter Length Form
1/2 to 12 " upto 12" or custom Round, Hex, Square, Rectangular
Specification Grade Application
ASTM A276 | ASME SA276 Super Duplex 2507 (UNS S32760/S32750 )
power, marine, pulp and paper
If you need super duplex stainless steel rectangular and annealed bar in almost any size, we can deliver it to you in the highest possible quality. must know its more shape and sizes
Basic types of super duplex bar
ASTM A276 SDSS hex bar

ASTM A276 SDSS hex bar

  • Petrochemical
  • Water desalinization
  • Marine
Super duplex alloy rectangular bar

Super duplex alloy rectangular bar

  • Matt Finish,
  • NO.4 Finish
  • BA Finish
Super duplex bright bar

Super duplex bright bar

  • Tolerance: +/-0.2mm
  • ASTM A276 | ASME SA276
  • Dia: 6.35 to 355.6 mm
As super duplex round bar suppliers, we are providing SDSS cold drawn, hot rolled, bright bar with mill TC at the most affordable prices, view equivalent/ chemical /mechanical properties
Super duplex rod chemical properties
Others N C Cr Mo Ni
S=0.001 0.27 0.020 25 4.0 7
Super duplex alloy rectangular bar equivalent
MATERIAL UNS WERKSTOFF NR.
Super Duplex  S32760/S32750  1.4410
super duplex stainless steel bar mechanical properties
Ultimate Tensile Strength, ksi 116 min.
Hardness Rockwell C 32 max.
0.1% Offset Yield Strength 0.2%, ksi 91 min.
Elongation in 2 inches, % 15 min.
0.2% Offset Yield Strength 0.2%, ksi 80 min.
Impact Energy, ft.-lbs. 74 min.
What are super duplex flat bar different surface conditions ? how they differ with each other ?

The super duplex flat bar can be given different surface treatments to enhance its corrosion resistance and appearance. Some of the common finishes would include:

  • No. 1 Finish- Here the flat bar is hot rolled, annealed and pickled to give a dull, non-reflective surface with a rough texture.
  • No. 2D Finish- Cold rolling, annealing and pickling are done to achieve a smoother and more reflective surface than no. 1 finish.
  • No. 2B Finish - It is a more refined version of the 2D finish to achieve higher surface reflectivity.
  • No. 4 finish- The super duplex alloy rectangular bar undergoes mechanical polishing and they can be used in aesthetic applications.
  • Bright Annealed- This finish gives the most reflective and aesthetically pleasing results and thus, is used in architectural applications.
How do the hardness and toughness of super duplex steel square bar affect its performance?

The super duplex steel square bar shows a good balance of hardness and toughness. High hardness indicates good resistance to wear and plastic deformation along with increased durability. But increased hardness can reduce the toughness which makes the super duplex stainless steel square bar brittle and prone to cracking under high impact. This also means that high toughness will reduce the hardness which will make the bar less suitable for abrasive applications.

Which factor should consider during fabrication and welding of SDSS hex bar ?

Fabricating and welding SDSS hex bar needs some careful considerations to ensure material integrity and mechanical properties.

  • They should be properly cleaned or the contaminants can cause weld defects.
  • Selecting the right filler material will maintain its mechanical properties.
  • Choosing the right welding process and controlling heat input is very crucial.
SDSS hex bar size chart
Wt per Ft Size in Inches Wt per 12′
0.180 1/4″ 2.160
0.104 3/16″ 1.248
0.290 5/16″ 3.480
0.104 3/16″ 1.248
0.560 7/16″ 6.72
0.625 3/8″ 4.920
0.740 1/2″ 8.880
1.150 5/8″ 13.80
0.930 9/16″ 11.16
1.660 3/4″ 19.92
1.390 11/16″ 16.68
1.950 13/16″ 23.40
2.625 15/16″ 31.20
2.300 7/8″ 27.60
2.90 1″ 34.80
3.700 1-1/8″ 44.40
3.30 1-1/16″ 39.60
4.625 1-1/4″ 55.20
5.625 1-3/8″ 67.20
5.100 1-5/16″ 61.20
6.100 1-7/16″ 73.20
7.800 1-5/8″ 93.60
18.42 2-1/2″ 221.04
6.625 1-1/2″ 79.20
9.030 1-3/4″ 108.36
11.80 2″ 141.60
10.400 1-7/8″ 124.80
16.920 2-3/8″ 203.04
14.920 2-1/4″ 179.04
26.53 3″ 318.36
Super duplex flat bar size chart
Flat bar – metric sizes and weights
Flat Size Standard Length (metres) KG’s per Metre Colour Code
13 x 3 6.0 0.31 Blue
10 x 3 6.0 0.24 Blue
13 x 5 6.0 0.46 Orange
16 x 5 6.0 0.64 Orange
16 x 3 6.0 0.38 Blue
16 x 8 6.0 1.03 Red
20 x 5 6.0 0.81 Orange
20 x 3 6.0 0.48 Blue
20 x 6 6.0 0.97 White
25 x 3 6.0 0.60 Blue
20 x 10 6.0 1.61 Yellow
25 x 5 6.0 1.01 Orange
25 x 8 6.0 1.61 Red
25 x 6 6.0 1.21 White
25 x 10 6.0 2.01 Yellow
32 x 3 6.0 0.77 Blue
25 x 12 6.0 2.41 Pink
32 x 6 6.0 1.55 White
32 x 5 6.0 1.29 Orange
32 x 8 6.0 2.06 Red
32 x 12 6.0 3.09 Pink
40 x 3 6.0 0.97 Blue
32 x 10 6.0 2.58 Yellow
40 x 5 6.0 1.61 Orange
close