Titanium Grade 2 Pipe Fittings

  • Home
  • Titanium Grade 2 Pipe Fittings
Titanium grade 2 Pipe Fittings
How should titanium grade 2 pipe fittings be maintained?
  • Periodically inspect the pipe fittings for signs of damage, corrosion or wear.
  • Clean the titanium grade 2 pipe fittings to remove any dirt or contamination from the surface.
  • Avoid contact with chlorine and chloride containing compounds as Ti material is susceptible to getting damaged from them.
  • Make sure to properly store the titanium alloy gr 2 concentric reducer in a clean & dry environment.
  • Only use a compatible metal with the fittings to reduce the chances of galvanic corrosion.
  • Try to prevent physical damage caused by impact and mechanical stress.
Table of content

As an inexpensive manufacturer of titanium gr 2 buttweld fittings in India, we have a great deal of experience, know its temperature range

What temperature range is appropriate for titanium grade 2 fittings?

The titanium grade 2 fittings have a wide temperature range in which they can maintain their corrosion resistance and mechanical properties. The grade 2 material is suitable for extremely low temperature that often goes down to -196 °C or lower to 315 °C, without getting significantly degraded.

It might not be a good choice to use the cp ti grade 2 eccentric reducer beyond this temperature.

Mumbai-based supplier of custom-sized grade 2 titanium elbow and tee at the lowest price, read can titanium grade 2 fittings suitable in saltwater environments ?

Titanium grade 2 buttweld fittings

Titanium grade 2 buttweld fittings

Grade 2 titanium elbow

Grade 2 titanium elbow

UNS R50400 tee

UNS R50400 tee

Can titanium gr. 2 buttweld fittings be used in saltwater environments?

Titanium gr 2 buttweld fittings are an excellent choice to be used in a saltwater environment. It forms a natural oxide layer on the surface which protects the fittings from corrosion and enhances its durability. It is often used in offshore structures, seawater piping systems and shipbuilding industries.

The ASME SB-363 WNR 3.7035 stub end is also biocompatible and has a long service life in harsh seawater environment.

we carry and sell ASTM B363 UNS R50400 reducer and stub end with sizes ranging from 1/2′′ to 10′′ (seamless) and 1/2′′ to 48′′ (welded) here

Titanium grade 2 pipe fittings specification
titanium grade 2 pipe fittings specification

 

Welded Seamless Standard
1/2" to 48" 1/2" to 10" ASME/ANSI B16.9, ASME B16.28
Type Radius Thickness
Elbow, tee, reducer, cap stub end 1D to 10D or custom Sch 5S to Sch XXS
Surface Specification Process
Sand rolling, Sand blasting ASTM B363| ASME SB363 Seamless, welded, fabricated
According to ANSI/ASME B16.9, we are the only approved stockist of WNR 3.7035 seamless and welded fittings in the gulf countries, Get more about available types
Most commonly used titanium grade 2 fittings
Titanium alloy gr 2 reducer

Titanium alloy gr 2 reducer

  • 1/2 to 24 inch
  • Sch 5s to Sch XXS
  • ASTM B363 | ASME SB363
WNR 3.7035 stub end

WNR 3.7035 stub end

  • 2D, 1D
  • 5D, 3D
  • 8D, 6D, 10D
Cp ti gr 2 pipe bend

Cp ti gr 2 pipe bend

  • Welded
  • Seamless
  • Fabricated
We promise to supply ASME SB-363 ti gr 2 pipe bend and cross with the necessary documentation in the quickest time possible, examine its properties.
CP titanium grade 2 tee chemical properties
Ti Rest
O max. 0,25
C max. 0,08
Fe max. 0,30
N max. 0,03
H max. 0,015
UNS R50400 elbow mechanical properties
Yield strength min. 275, max. 450 MPa
Tensile strength min. 345 MPa
Elongation min. 20%
Density 4,51g/cm²
Melting point 1670°C
Thermal conductivity at 20°C 16 W/ m°C
Beta transus temperature 920 ± 4°C
Titanium gr 2 buttweld fittings equivalent
STANDARD WERKSTOFF NR. Specifications UNS
Titanium Gr. 2 Pipe W. NR. 3.7035, W. NR. 3.7034 ASME SB-265, AMS 4902 R50400
What are the specifications and standards for a grade 2 titanium elbow?

The grade 2 titanium elbow must be manufactured according to relevant industry standards and specifications. This will ensure the quality of the fittings along with its compatibility with other materials. Some common standards are ASTM B363, ASME B16.9 and ASME B16.5.

What makes titanium grades 2 and 5 different from one another?
  • CP ti Gr 2 pipe cross material is a pure titanium alloy wheres grade 5 consists of aluminium and vanadium too.
  • Grade 2 has lower strength than grade 5 material.
  • Grade 2 is preferred for applications where corrosion resistance is required whereas grade 5 is employed for its high strength.
What are the benefits of utilizing titanium alloy gr. 2 tee?
  • The cp titanium grade 2 tee is a versatile product that helps with branching the fluid/gas flow in a pipeline.
  • There are different types of tees like equal, reducing, etc., which makes them suitable for various applications.
  • This space saving fitting offers efficient fluid distribution.
  • They are easy to install and minimize pressure drop in a piping system.
  • Grade 2 titanium is cost effective and the tee provides a secured & leak-proof connection.
Titanium alloy gr 2 reducing tees dimensions
NPS Center to End
C
O.D.
D1
O.D.
D
Center to End
M
1 - 1/2 38 21.3 33.4 38
3/4 - 1/2 29 21.3 26.7 29
1.1/4 - 1/2 48 21.3 42.2 48
1 - 3/4 38 26.7 33.4 38
1.1/4 - 3/4 48 26.7 42.2 48
1.1/2 - 1/2 57 21.3 48.3 57
1.1/4 - 1 48 33.4 42.2 48
1.1/2 - 3/4 57 26.7 48.3 57
1.1/2 - 1.1/4 57 42.2 48.3 57
1.1/2 - 1 57 33.4 48.3 57
2 - 3/4 64 26.7 60.3 44
2 - 1.1/4 64 42.2 60.3 57
2 - 1 64 33.4 60.3 51
2 - 1.1/2 64 48.3 60.3 60
2.1/2 - 1.1/4 76 42.2 73 64
2.1/2 - 1 76 33.4 73 57
2.1/2 - 1.1/2 76 48.3 73 67
3 - 1.1/4 86 42.2 88.9 70
2.1/2 - 2 76 60.3 73 70
3 - 1.1/2 86 48.3 88.9 73
3 - 2.1/2 86 73 88.9 83
3 - 2 86 60.3 88.9 76
3.1/2 - 1.1/2 95 48.3 101.6 79
3.1/2 - 2.1/2 95 73 101.6 89
3.1/2 - 2 95 60.3 101.6 83
4 - 1.1/2 105 48.3 114.3 86
3.1/2 - 3 95 88.9 101.6 92
4 - 2 105 60.3 114.3 89
4 - 3 105 88.9 114.3 98
4 - 2.1/2 105 73 114.3 95
4 - 3.1/2 105 101.6 114.3 102
Dimensions WNR 3.7035 stub ends
NPS T OD F G R
Type B
R
Type A
3/4 2.11 26.7 50.8 42.9 0.76 3.05
1/2 2.11 21.3 50.8 34.9 0.76 3.05
1.1/4 2.77 42.2 50.8 63.5 0.76 4.83
1 2.77 33.4 50.8 50.8 0.76 3.05
1.1/2 2.77 48.3 50.8 73 0.76 6.35
2.1/2 3.05 73 63.5 104.8 0.76 7.87
2 2.77 60.3 63.5 92.1 0.76 7.87
3.1/2 3.05 101.6 76.2 139.7 0.76 9.65
3 3.05 88.9 63.5 127 0.76 9.65
4 3.05 114.3 76.2 157.2 0.76 11.18
6 3.40 168.3 88.9 215.9 1.52 12.7
5 3.40 141.3 76.2 185.7 1.52 11.18
8 3.76 219.1 101.6 269.9 1.52 12.7
24 6.35 609.6 152.4 692.2 1.52 12.7
12 4.57 323.9 152.4 381 1.52 12.7
10 4.19 273.1 127 323.9 1.52 12.7
14 4.78 355.6 152.4 412.8 1.52 12.70
18 4.78 457.2 152.4 533.4 1.52 12.70
16 4.78 406.4 152.4 469.9 1.52 12.7
20 5.54 508 152.4 584.2 1.52 12.70
close