India's Largest Stockist and Supplier Of Nickel Alloys Since 2007
| Incoloy 800 Plate Description | |
|---|---|
| Ex.Stock |
|
| Availabel Brand | VDM, Special Metals, Nippon Yakin |
| Origin | Japan, India, Europe, USA |
| Stress-Corrosion Cracking |
|
| Custom Size | Yes |
| MTC | EN 10204 3.1 |
| Available Forms | Plate, Sheet, Strip, Coil, Shim Sheet, Foil etc. |
| Welding Electrodes | AWS A5.14 ERNiCr-3 or AWS A5.11 ENiCrFe-2 |
| Delivery Time | Mexico : 25-30 Days Malaysia : 6-8 Days |
| HSN Code | 72192212 |
|
Need Incoloy 800 Plate Free Sample? Click Here |
|
Supplier Of Alloy 800H Sheet in India With Thickness 0.02 to 4.0 mm or Custom
Thickness Chart of Inconel 800 Plate
| 6.3mm | 19mm | 4.8mm | 12.7mm | 9.5mm | 15.9mm |
| 1/4" | 3/4" | 3/16" | 1/2" | 3/8" | 5/8" |
|---|---|---|---|---|---|
| 31.8mm | 63.5mm | 25.4mm | 44.5mm | 38.1mm | 50.8mm |
| 1 1/4" | 2 1/2" | 1" | 1 3/4" | 1 1/2" | 2" |
Incoloy 800 Sheet
Alloy 800 Plate
ASTM B409 UNS N08800 Sheet Metal
Table of Content
- Incoloy 800 Plate Specification
- What Industry Standards does Inconel 800 comply with?
- Incoloy 800 Sheet Ex.Stock
- Size Chart of Sheet 1.4876
- Alloy 800 Plate Price
- Incoloy 800 Strip Size Range
- Ferrochronin 800 Shim Temperature Range
- Inconel 800 Sheet Thickness Tolerance Chart
- Inconel 800HT Clad Plate Surface Finishes
- What are the typical applications of Inconel 800?
- Weight Chart of Incoloy 800 Hot Rolled Plate
- Incoloy 800 Sheet Certificates
- Types of Incoloy 800 Plate
- Difference between Incoloy 800 and 825
- Why is Inconel 800 plate so difficult to machine?
- Impact Strength of Incoloy 800 Sheet
- Annealed Properties of UNS N08800 Strips
- What are the key properties of Incoloy 800 Coil?
- Stress Rupture Strength of Inconel 800 Coil
- Incoloy 800 Shim Corrosion Rate
- Alloy 800 Hot Rolled Plate Fabrication Methods
- AMS 5877 Sheet Tolerances on Width
- Incoloy 800 Coil Tolerances on Length
- Corrosion Rates of Incoloy 800 Sheet
- ASTM B409 UNS N08800 Sheet Gauge Chart
- Alloy 800 Strip Equivalent Material
- Inconel 800 Chemical Composition
- Incoloy 800 Shim Mechanical Properties
- Physical Properties of Incoloy 800 Coil
- Rupture Strengths of Welding Products for Incoloy Alloy 800 Sheet
- Incoloy 800 Shim Electrical Properties
| Specifications | AMS 5877, ASTM B409 |
|---|---|
| UNS | N08800 |
| International Specifications | EN 10028-7, BS 3073NA15, BS 3072NA15, DIN 17460, VdTüV 412 & 434, EN 10095 |
Outokumpu Make Cut to Size ASTM B409 UNS N08800 Coil and Shims Stockist in Mumbai At Cheap Price
| SIZE in MM | SIZE in Inch |
|---|---|
| 3.40mm | .134" |
| 3.18mm | .125" |
| 4.75mm | .187" |
| 3.96mm | .156" |
| 7.92mm | .312" |
| 63.5mm | 2.500" |
| 6.35mm | .250" |
| 12.7mm | .500" |
| 9.53mm | .375" |
| 15.9mm | .625" |
| 22.2mm | .875" |
| 19.1mm | .750" |
| 25.4mm | 1" |
| 31.8mm | 1.250" |
| 28.6mm | 1.125" |
| 44.5mm | 1.750" |
| 38.1mm | 1.500" |
| 50.8mm | 2" |
| 76.2mm | 3" |
For Most Updated Incoloy 800 Plate Price Click Here
| Grade | Price in USD | Price in INR |
|---|---|---|
| alloy 800 | $21.62 | 1800 per kg |
| Dimension (mm) | KG P/M2 |
|---|---|
| 3.18 X VARIOUS ANN | 28.6 |
| 0.5 X 1000 X 2000 | 4.5 |
| 1.6 X 1200 X 3048 | 14.4 |
| 0.7 X 1219 X 3048 | 6.3 |
| 1.2 X 1219 X 3048 | 10.8 |
| 3 X 1200 X 3000 | 27.0 |
| 0.9 X 1219 X 3048 | 8.1 |
| 2.0 X 1219 X 3048 | 18.0 |
Buy Japanese Origin WNR 1.4876 Strip Stock Suitable to Work At Temperature 1500°F (816°C)
| Condition | Temperature (°C) |
|---|---|
| Hot working | 1205 °C |
| Precipitation temperature | 760 °C |
| Heavy forging | 1010 °C |
| First melting temperature | 1260 °C |
| Light forging | >870 °C |
| Incoloy 800 plate Tolerance over and under nominal thickness t (mm) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Width w (mm) | 8.0<t <10.0 | 4.5<t <6.0 | 2.5<t <4.5 | 6.0<t <8.0 | 12.5<t <16.0 | 10.0<t <12.5 | 20.0<t <25.0 | 16.0<t <20.0 | 30<t <40.0 | 25.0<t <30.0 |
| 2700< w <3000 | 1.0 | 0.80 | 0.90 | 1.0 | 1.0 | 1.3 | 1.1 | 1.8 | 1.4 | |
| 1200< w <1500 | 0.35 | 0.25 | 0.20 | 0.30 | 0.80 | 0.38 | 0.90 | 0.80 | 1.4 | 1.0 |
| w < 1200 | 0.32 | 0.23 | 0.20 | 0.30 | 0.80 | 0.35 | 0.80 | 0.80 | 1.4 | 1.0 |
| 1500< w <1800 | 0.38 | 0.28 | 0.20 | 0.32 | 0.80 | 0.40 | 0.90 | 0.80 | 1.5 | 1.1 |
| 2100< w <2400 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 1.0 | 0.90 | 1.5 | 1.1 | |
| 1800< w <2100 | 0.40 | 0.30 | 0.20 | 0.36 | 0.80 | 0.45 | 0.90 | 0.80 | 1.5 | 1.1 |
| 2400< w <2700 | 0.80 | 0.80 | 0.80 | 0.90 | 0.80 | 1.1 | 1.0 | 1.7 | 1.3 | |
Explore Brushed and Mirror Finish Inconel 800HT Clad Plate Stock Ideal For Furnace Equipment Parts
- Brushed
- Mirror Finish
- Hot Rolled (HR) Finish
- Cold Rolled (CR) Finish
- 2B Finish
- Satin Finish
- Sand Blasted
| Weight per Unit Area | ||
|---|---|---|
| lbs/in² | Thickness | kg/m² |
| 0.08 lbs/in² | 1/4 inches | 56.245568 kg/m² |
| 0.06000 lbs/in² | 3/16 inches | 42.184176 kg/m² |
| 0.161 lbs/in² | 1/2 inches | 113.1942056 kg/m² |
| 0.121 lbs/in² | 3/8 inches | 85.0714216 kg/m² |
| 0.235 lbs/in² | 3/4 inches | 165.221356 kg/m² |
| 0.196 lbs/in² | 5/8 inches | 137.8016416 kg/m² |
| 0.313 lbs/in² | 1 inches | 220.0607848 kg/m² |
| 0.274 lbs/in² | 7/8 inches | 192.6410704 kg/m² |
| 0.47 lbs/in² | 1 1/2 inches | 330.442712 kg/m² |
| 0.784 lbs/in² | 2 1/2 inches | 551.2065664 kg/m² |
| 0.391 lbs/in² | 1 1/4 inches | 274.9002136 kg/m² |
| 0.705 lbs/in² | 2 1/4 inches | 495.664068 kg/m² |
| 0.627 lbs/in² | 2 inches | 440.8246392 kg/m² |
| 0.862 lbs/in² | 2 3/4 inches | 606.0459952 kg/m² |
| 0.549 lbs/in² | 1 3/4 inches | 385.9852104 kg/m² |
| 0.941 lbs/in² | 3 inches | 661.5884936 kg/m² |
Offer Ferrochronin® 800 Hot and Cold Rolled Plate Stock With MTC and Complete Documentation
- EN 10204/3.1B
- Certificate of Origin legalized
- 100% Radiography Test Report
- Third Party Inspection Report
- Quality Assurance Plan (QAP)
- Certificate of Origin
- Fumigation Certificates
- Raw Material Test Reports
- Material Traceability Records
- Heat Treatment Charts
WNR 1.4876 Coil
Nickel Alloy 800 Strip
Inconel 800 Foil
Ferrochronin® 800 Clad Plate
Nickelvac® 800 Rolling Plate
Incoloy 800 Annealed Plate
Alloy 800 Hot Rolled Plate
ASTM B409 UNS N08800 Cold Rolled Plate
Incoloy 800 Shim Stock
| Description | Incoloy 800 | Incoloy 825 |
|---|---|---|
| Matrix | Nickel Iron Chromium |
Nickel Iron Chromium Molybdenum Copper |
| Melting Range | 2475-2525 °F | 2500-2550 °F |
| Density | 7.94 g/cm³ | 8.14 g/cm³ |
| Application | Automotive Electrical Resistance |
Chemical Processing Marine |
| Price | Low | High |
| Standards | ASTM A480, ASTM A240, ASTM B906, ASTM B409 | ASTM B906, ASTM B424 |
| Incoloy 800 plate Temperature | Specimen Orientation | Charpy Keyhole Impact Strength | ||
|---|---|---|---|---|
| °C | °F | J | ft•lbf | |
| -253 | -423 | Longitudinal Transverse |
99 87 |
73.0 64.3 |
| -79 | -110 | Longitudinal Transverse | 122 115 |
89.8 85.0 |
| 21 | 70 | Longitudinal Transverse | 122 112 |
89.8 82.7 |
| -196 | -320 | Longitudinal Transverse |
106 94 |
78.3 69.5 |
| Grade | Annealing |
|---|---|
| Incoloy 800 plate | for 15 min 982°C (1800°F) |
- High Heat Resistance
- High Strength
- Durability Under Stress
- Machinability
- Oxidation Resistance
- Resistance to Carburization and Nitriding
- Corrosion Resistance
- Oxidation Resistance
| Incoloy 800 plate Temperature | 100,000 h | 30,000 h | 10,000 h | 50,000 h | |||||
|---|---|---|---|---|---|---|---|---|---|
| °C | °F | ksi | MPa | ksi | MPa | ksi | MPa | ksi | MPa |
| 705 | 1300 | 8.0 | 55 | 9.5 | 66 | 11.0 | 76 | 8.8 | 61 |
| 650 | 1200 | 13.0 | 90 | 15.0 | 103 | 17.5 | 121 | 14.0 | 97 |
| 815 | 1500 | 3.7 | 26 | 4.4 | 30 | 5.2 | 36 | 4.1 | 28 |
| 760 | 1400 | 5.3 | 37 | 6.3 | 43 | 7.3 | 50 | 5.8 | 40 |
| 925 | 1700 | 1.2 | 8.3 | 1.6 | 11 | 1.9 | 13 | 1.4 | 10 |
| 870 | 1600 | 2.5 | 17 | 3.0 | 21 | 3.5 | 24 | 2.8 | 19 |
| 980 | 1800 | 0.8 | 5.5 | 1.0 | 6.9 | 1.2 | 8.3 | 0.9 | 6.2 |
| Alloy | Corrosion Rate | |
|---|---|---|
| mm/y | mpy | |
| Incoloy 800 plate | 0.15 | 6.0 |
| Tolerance (mm) | ||||
|---|---|---|---|---|
| Trimmed edge | Mill edge | |||
| Nominal width (mm) | Minus | Plus | Minus | Plus |
| 1200 < w < 1500 | 0 | 5 | 0 | 20 |
| w < 1200 | 0 | 3 | 0 | 20 |
| w > 1500 | 0 | 5 | 0 | 20 |
| Tolerance(mm) | ||
|---|---|---|
| Nominal length (mm) | Minus | Plus |
| L < 2,000 | 0 | 10 |
| 2,000 < L < 8,000 | 0 | 0.005 times L |
| L > 8,000 | 0 | 40 |
- Aluminum sulfate Al₂(SO₄)₃, 5%: 0.0003 mm/year
- Acetic acid CH₃COOH, 10%: 0.0003 mm/year
- Ammonium hydroxide NH₄OH, 5%: 0.0003 mm/year
- Ammonium chloride NH4Cl, 5%: 0.0006 mm/year
- Ammonium sulfate (NH₄)₂SO₄, 5%: 0.00 mm/year
- Ammonium hydroxide NH₄OH, 10%: 0.0003 mm/year
- Bromine water: 0.19 mm/year
- Barium chloride BaCl2, 10%: 0.0008 mm/year
- Chromic acid H2CrO4, 5%: 0.041 mm/year
- Calcium chloride CaCl2, 5%: 0.0003 mm/year
- Copper sulfate CuSO4, 10%: 0.00 mm/year
- Citric acid C₆H₈O₇, 10%: 0.00 mm/year
- Ferrous ammonium sulfate (NH₄)₂Fe(SO₄)₂·6H₂O, 5%: 0.002 mm/year
- Ferric chloride FeCl3, 5%: 11 mm/year
- Methanol CH3OH: 0.00 mm/year
- Lactic acid C3H6O3, 10%: 0.001 mm/year
- Oxalic acid C2H2O4, 10%: 0.28 mm/year
- Oxalic acid C2H2O4, 5%: 0.003 mm/year
- Sodium bisulfite NaHSO3, 5%: 0.0008 mm/year
- Potassium ferricyanide K3[Fe(CN)6] 5%: 0.001 mm/year
- Sodium chloride NaCl, 10%: 0.0003 mm/year
- Sodium carbonate Na₂CO₃: 0.00 mm/year
- Sodium hypochlorite NaClO, 1%: 0.127 mm/year
- Sodium chloride NaCl, 20%: 0.0086 mm/year
- Sodium sulfate Na2SO4, 5%: 0.00 mm/year
- Sodium hypochlorite NaClO, 5%: 0.2 mm/year
- Sulfurous acid H2SO35%: 1.09 mm/year
- Sodium sulfate Na2SO4, 10%: 0.0006 mm/year
- Zinc chloride ZnCl₂, 10%: 0.0003 mm/year
- Tartaric acid HOOC−(CHOH) 2−COOH, 10%: 0.0006 mm/year
| Gauge (in) | Width (in) |
|---|---|
| 13-29 | max. 48 |
| 10-24 | max. 72* |
| 11-24 | max. 60 |
| 12-24 | max. 60 |
| 18-28 | max. 48 |
| STANDARD | UNS | OR | WERKSTOFF NR. | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|---|
| Incoloy 800 plate | N08800 | XH32T | 1.4876 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 |
Nickel
Carbon
Iron
Manganese
Sulfur
Silicon
| Element | Elongation | Density | Yield Strength (0.2%Offset) | Melting Point | Welding Wire Tensile Strength |
|---|---|---|---|---|---|
| Incoloy 800 plate | 30 % | 7.94 g/cm3 | Psi -30,000 , MPa -205 | 1385 °C (2525 °F) | Psi -75,000 , MPa -520 |
| Incoloy 800 plate Property | Metric | Imperial |
|---|---|---|
| Melting Range, °F (°C) | 1357 -1385 | 2475 -2525 |
| Density, Ib/in3 (g/cm3 ) | 7.94 | 0.287 |
| Thermal ConductivityA , Btu•in/ft2•h•°F (W/m•°C) | 11.5 | 80 |
| Curie Temperature, °F (°C). | -115 | -175 |
| Specific Heat, Btu/lb•°F (J/kg•°C). | 460 | 0.11 |
| Coefficient of Expansion, 10-6 in/in•°F (µm/m•°C) 70-200°F (20-100°C) |
14.4 | 7.9 |
| Permeability at 200 Oersted (15.9 kA/m) | 1.014 | |
| Electrical ResistivityA , ohm•circ mil/ft (µΩ•m). | 0.989 | 595 |
| Welding Product | Temperature | Stress for Rupture in | ||||||
|---|---|---|---|---|---|---|---|---|
| 100 hours | 1000 hours | 10,000 hours | ||||||
| °F | °C | ksi | MPa | ksi | MPa | ksi | MPa | |
| INCO-WELD A Electrode | 1000 | 540 | 60.0 | 414 | 51.0 | 352 | 39.0 | 269 |
| 1200 | 650 | 35.0 | 241 | 24.5 | 196 | 16.0 | 110 | |
| 1400 | 760 | 16.5 | 114 | 11.0 | 76 | 7.1 | 49 | |
| 1600 | 870 | 7.0 | 48 | 3.65 | 25 | 1.9 | 13 | |
| 1800 | 980 | 2.3 | 16 | 0.9 | 6 | - | - | |
| INCONEL Filler Metal 82 | 1000 | 540 | 58.0 | 400 | 52.0 | 359 | 47.0 | 324 |
| 1200 | 650 | 36.0 | 252 | 27.5 | 190 | 20.5 | 141 | |
| 1400 | 760 | 16.0 | 110 | 11.5 | 79 | 8.3 | 57 | |
| 1600 | 870 | 6.8 | 47 | 3.5 | 24 | 1.75 | 12 | |
| 1800 | 980 | 2.7 | 19 | 1.25 | 9 | 0.57 | 4 | |
| Property | Metric | Imperial |
|---|---|---|
| Specific Heat | 460 J/kg•°C | 0.11 Btu/lb•°F |
| Coefficient of Expansion,(µm/m•°C) | 14.4 | 7.9 |
| Thermal ConductivityA ,(W/m•°C) | 11.5 | 80 |
| Electrical ResistivityA , (µΩ•m). | 0.989 | 595 |
Ready To Dispatch Stock For Urgent Requirement
1mm Thickness 800 Incoloy Nickel Alloy Sheet Plate
Incoloy 800 Nickel Sheet 1000x1200mm
Incoloy 800 1500mm Width Sheet Alloy Nickel Plate
Nickel Alloy 0.1mm Incoloy 800 Plate
Inconel 800 960X750mm Nickel Alloy Steel Coil/Plate/Sheet
T0.5mm Incoloy 800 Nickel Alloy Plate
Incoloy 800 Plate Shipping Time As Per Location
| Cost Changes 5 % extra | |
|---|---|
| Export to | Shipping Time |
| Saudi Arabia | 7 |
| UAE | 5 days |
| Qatar | 7 |
| Kuwait | 10 |
| USA | 40-60 |
| Oman | 5 |
| Italy | 30 |
| France | 30 |
| Uk | 30 |
FAQ
What is the thickness of incoloy 800 plates?
1.6 mm to 50.8 mm
What are the main features of Incoloy 800 Coil ?
excellent resistance
Which method use to weld Incoloy 800 Shim ?
GTAW and SMAW
What is density of UNS N08800 sheet ?
7.94 g/cm³ | 0.287 lb/in³
Which welding electrodes use for welding Incoloy 800 Shim ?
Incoweld A
Get in touch
Call
+91-22-6639 4858
Email